Wire-wound molding process, wet film thickness of 80 microns, effective application width of 25.5 cm, can be used at the same time Spreader a variety of Coating comparative experiments, with Drawdown Plate use effect is better.
With bar +/- 0.001mm and Drawdown blade +/- 0.003mm High Accuracy Spreader capability, support 1-300mm/s stepless speed regulation. The clamshell Drawdown blade design is easy to clean, Glass plate countertop ensures Spreader flatness, and optional heating function enhances adaptability.
The punch is pushed to the test plate at a constant speed of 0.2 +/-0.1mm/s, and the thickness range of the test plate is 0.30-1. 25mm, which can detect the degree of coating cracking and is suitable for testing of various materials.
Spreader wet film thickness of 200 microns, groove design is not easy to block and easy to clean, to ensure the uniformity and accuracy of Spreader, support laboratory manual or Automatic Film Applicator.
Wire-wound process to achieve 40μm wet film thickness, one operation can simultaneously Spreader two or more Coatings, matching Drawdown Plate to improve Spreader repRoducibility, suitable for soft to strong all kinds of substrates.
Adopt clamshell type Blade Coating head design, easy to clean; Spreader accuracy up to +/- 0.003mm, film thickness control precision; coating speed stepless speed regulation, application length can be adjusted freely, suitable for High Accuracy Laboratory Moulding needs.
Using formed pRoduction process, wet film thickness 96μm, application width 250mm, 304 stainless steel material to ensure durability and accurate Spreader effect, suitable for laboratory precision Spreader needs.
Using rigid polyester plate with foam rubber cushion, size 240x340mm, can absorb operating pressure, improve proofing Repeatability and uniformity, suitable for a variety of substrate testing.
Spreader wet film thickness 120 μ m, groove design is not easy to block and easy to clean, Spreader accuracy is high, support manual Spreader and Automatic Film Applicator with use.
Spreader thickness range 0~ 10mm, coating speed 5~ 180mm/s, equipped with high flat Glass table, support stepless speed and automatic feeding function, to ensure uniform and stable Spreader.
Equipped with strong clip fixed Spreader cardboard, the bottom four rubber pads prevent sliding, size 300 × 100 mm, weight 1.3 kg, to ensure the stability of the Spreader process and Repeatability.
Wet film thickness can be as low as 1.5μm, support ultra-thin Spreader; use extrusion process and chrome plating surface to reduce clogging and disconnection problems, groove design to optimize Coating Weight, adapt to a variety of substrate needs.
The total film width of 90mm is divided into 10 gaps, the depth is gradually increased by 25μm, and the spacing is 1.5mm. The removable guide plate design is easy to operate on different thickness test panels.
Adopt drawdown Bar & Blade double coating method, Spreader accuracy up to +/- 0.001mm, support 5-180mm/s stepless speed change, Glass baseplate with fixture fixed to achieve stable Spreader effect.
Using drawdown blade and roller coating double Spreader head device, Spreader thickness range of 0.005-3mm, drying temperature up to 200 ℃, with automatic correction and precision thickness adjustment function.
