A bending angle is less than 45 degrees, can test 0.5~ 1.0mm Film thickness sample, flattening mechanism stroke is not less than 10mm, using crank lifting mechanism to achieve T-shaped bending test.
Using pure mechanical design, the coating performance is measured by conical mandrel bending test plate, the test plate size is 100mm × 180mm, the thickness is less than or equal to 0.8mm, and the operation is simple and reliable.
Measurement range 0~ 500mN.m, span 5-50mm eight gear adjustable, angular velocity 0.5~ 1000 °/min adjustable, support self-calibrating and quick change Sensor, suitable for bending test of different resilience materials.
Equipped with 2 to 12mm eight diaMeter stainless steel cylindrical mandrel, in the form of hinged bending, in line with GB6742 standard, suitable for Coating bending performance testing.
With +/- 0.1% accuracy Sensor and 0.01mN resolution, it supports 1-92 ° bending angle adjustment and 0.5-50 °/sec angular speed control, with self-Adjustment and three independently adjustable test angles, suitable for 0.01-5 thickness materials.
Support 0.1-1 steel plate and 0.1-2 Aluminum Panel test, can complete 0T to 1T multi-stage bending, equipped with pliers pressing device and tape adhesion inspection function, to meet the standard bending test process.
It is suitable for low temperature bending resistance test of 32-63mm diaMeter silicon core tube. The sample needs to be kept at -20 ℃ +/- 2 ℃ for 2 hours, and there is no cracking or obvious stress blushing phenomenon after testing.
The instrument is equipped with eight kinds of diaMeter stainless steel cylindrical mandrel, which adopts the form of hinge connection bending, which can accurately test the bending deformation of coatings under different diaMeters to ensure the test Reliability.
Can test 4 shoes at the same time, bending angle 0 °~ 90 ° adjustable, Test speed 0~ 140 times/min, with automatic return and LCD counter function.
Maximum load 100KN, suitable for bending testing of various materials, with high load-bearing capacity and Stability, to meet different testing requirements.
The gear pair and crank lifting mechanism are used to achieve accurate bending, the first bending angle is less than 45 °, the flattening mechanism Travel ≥ 10mm, which can test 0.5-2 mm thickness plates and support OT to T bend test.
The test bending angle is less than 45 degrees, suitable for steel plate thickness 0.5~ 1.0mm and Aluminum Panel thickness 0.5~ 2.0mm. The gear pair and crank lifting mechanism are used to achieve T-shaped bending, which is easy to operate.
Equipped with a total of 12 shaft Rods of 2-32mm, it can test the 1.0mm thickness sample, and test the anti-cracking performance of the coating through 180 ° bending, which is easy to operate and accurate.
The tapered shaft size range is 3.2~ 38mm, and the shaft length is 203mm, which can test the cracking and disbonding performance of the paint film under bending conditions, in line with international standards.
Equipped with 13 kinds of diaMeter shaft Rods, covering the range of 2-32mm, can detect 1.0mm thickness samples, evaluate the film anti-cracking performance through different bending radii, easy and accurate operation.
