Adopt -80 ℃ cold trap temperature and ≤ 5Pa Vacuum Level, support sample pre-freezing and freeze-drying of various containers, with one-button defrosting, data export and vacuum alarm functions, easy operation and easy maintenance.
Using silicone oil heating technology, the cold trap temperature can reach -80 ℃, Ultimate vacuum degree ≤ 2Pa, with sample pre-freezing function and color Touchscreen operation, support a variety of container freeze-drying needs.
Danfoss Compressor to achieve -60 ℃ low temperature, water capture up to 4kg/batch. With cold trap pre-freezing function without additional equipment, color Touchscreen display operating paraMeters, support data export and remote control.
Cold trap temperature can reach -80 ° C, Vacuum Level ≤ 5Pa, with sample pre-freezing function and color Touchscreen operation, support for a variety of container freeze-drying, built-in maintenance reminders and one-click defrosting.
Using sublimation principle to achieve material dehydration, cold trap temperature up to -60 ℃, Vacuum Level ≤ 5Pa, equipped with color Touchscreen and remote control function, support a variety of container freeze-drying operation.
The bottom hole and tip design are adopted, and the outflow time is determined by observing the appearance of the tip, which realizes rapid viscosity measurement and is suitable for on-site testing needs.
Pure oil-free design ensures clean gas, exhaust volume of 1500L/min, automatic start and stop to reduce energy consumption, pressure dew point 2-10 ℃, suitable for a variety of industry needs.
The multi-channel mechanical compression refrigeration system is used to achieve rapid temperature change of 10 ° C/min, and the PID adaptive algorithm is equipped to ensure the Temperature Fluctuation +/- 0.5 ° C. The temperature uniformity is guaranteed by the design of the top orifice air supply.
Adopt multi-channel mechanical compression refrigeration system and adaptive throttling technology to achieve rapid temperature change of 5 ° C/min; Equipped with PID adaptive algorithm to ensure Temperature Fluctuation +/- 0.5 ° C, through forced air duct system to ensure temperature uniformity.
The multi-channel mechanical compression refrigeration system is used to achieve rapid temperature change of 15 ° C/min, and the PID adaptive algorithm is equipped to ensure that the Temperature Uniformity is ≤ 2 ° C, and the 512L studio meets the diverse testing requirements.
Adopt multi-channel mechanical compression refrigeration system and frequency conversion technology to achieve rapid temperature change of 5 ° C/min; equipped with PID adaptive algorithm to ensure Temperature Uniformity ≤ 2 ° C, support 120 groups of program editing and remote monitoring functions.
Measurement range 0-99.9%, resolution 0.1%, Response Time 1 second, portable design supports rapid on-site detection, probe Sensor can penetrate deep into the material internal measurement.
With a linear temperature rise and fall rate of 10 ° C/min and a wide temperature range of -60 to 150 ° C, multi-channel refrigeration system and PID adaptive algorithm are used to achieve rapid temperature convergence, and environmentally friendly refrigerants and low noise design are equipped.
Conductivity Detector principle and temperature and humidity compensation technology, measurement accuracy of +/- 0.5%, Response Time of 1 second, integrated design supports on-site rapid detection, suitable for a variety of grain moisture measurement.
Multi-channel mechanical compression refrigeration system and adaptive throttling technology are used to achieve 5 ° C/min linear temperature rise and drop and +/- 0.5 ° C Temperature Fluctuation; equipped with PID adaptive algorithm and forced air duct system to ensure temperature uniformity and rapid convergence.
