1000 +/- 5g dead weight and 500 +/- 5g payload combined pressure, equipped with 20 times reading Microscope to achieve 0.1mm accuracy measurement, can quantify the anti-indentation performance of coatings and support plastic deformation analysis.
Cedar device weight 1Kg +/- 5g, Cedar load 500 +/- 5g, reading accuracy 0.1mm, in line with international standards, easy and reliable operation.
Using 500 +/- 5g Cedar load and 0.1mm reading accuracy, the anti-indentation performance was measured by the reciprocal function of Cedar length, which was stable and easy to operate.
High Accuracy Position Sensor, indentation accuracy of 0.01mm, the maximum can be measured 1.25mm thick plate, automatic zero after the test without cumulative error, with 10 times magnifying glass for easy observation.
Set cross-cut adhesion, film thickness and Buchholz Crowd Hardness three test functions in one, cross-cut knife 6 blade spacing 1mm/2mm, Crowd knife load 500 +/- 5g, using the destruction Measurement principle.
Using 500 +/- 5g Cedar load and 0.1mm reading accuracy, the surface performance of the material is accurately evaluated by Cedar test, which is easy to operate and meets international standards.
Test accuracy is ensured by using 500g payload and carbide circular tool, built-in horizontal bubble, and 20 times Microscope can accurately measure the size of the Crowd, with a reading accuracy of 0.1mm.
Using 500g Cedar load and 30mm Cedar knife, the length of Cedar is accurately read by 20 times Microscope. The length of Cedar is inversely proportional to Hardness, and the test results can be obtained in 30 seconds with easy operation.
The indentation speed is adjustable 0.01-0 mm/s, the maximum indentation force is 5000N, equipped with emergency button and color touch screen, safe and convenient operation, suitable for a variety of material testing.
Built-in gearbox reduces manual force, indentation depth Display resolution 0.01mm, maximum indentation depth 15mm, suitable for a variety of standard tests, stable operation and high accuracy.
Using large torque stepper motor to achieve automatic reset to zero, indentation accuracy of 0.01mm, support 0.1-0 mm/s adjustable speed, through the indentation depth to determine the minimum depth of coating cracking or disengagement.
The device adopts destructive measurement, resolution +/- 0.001mm, can carry out V-shaped incision, grid cutting and Cedar test, directly observe Coating thickness and Cedar length, support multi-layer film analysis.
Punch diaMeter 20mm, indentation accuracy +/- 0.05mm, maximum depth 10mm, can measure the minimum depth of cracking or from the substrate of the coating, support single and double top coating test, equipped with digital display resolution 0.01mm.
