Using formed process, wet film thickness 35 microns, application width 400mm, continuous wire, uniform film and good repRoducibility, easy to clean after the experiment.
Using 180 * 480mm size, with wire Rod or Film Applicator scraping ink, is conducive to the film flat and effective, improve film mass.
Wire-wound structure ensures 0.1 micron High Accuracy, wet film thickness 50.3 μm, stainless steel material is durable and easy to clean, and the wide-Rod Film Applicator achieves uniform coating.
A groove control film is formed on the smooth Rod body by extrusion process. The wear-resistant stainless steel material is not easy to break the wire and is easy to clean. The wet film thickness is 105.2 μ m and the application width is 300mm.
Glass material is conducive to film flatness, size 230 * 340mm, with wire Rod or Film Applicator for scraping operation is more effective.
Using wire-wound stainless steel wire structure, the film thickness is 100 microns, the total length is 375mm, and the application width is 255mm to ensure that the Spreader is uniform and firm, suitable for precision experimental operation.
Drawdown blade and bar two coating methods, support speed and length adjustment, high film thickness control accuracy, and with Vacuum chuck function, easy to handle soft substrate, easy to clean.
Wire-wound design wet film thickness 11.4μm, wire diaMeter Φ 0.13mm, not easy to block and easy to clean, suitable for a variety of substrates, to achieve uniform Spreader and flexible thickness adjustment.
Glass material ensures that the film is flat, used with wire Rod or Film Applicator, the specification size is 110 * 180mm, and the operation is simple and efficient.
Wet film thickness 22.9 microns, diaMeter 9.52 mm, the forming Rod uses an extrusion process to process continuous grooves, with no wire breakage and easy cleaning; the wire-wound Rod is based on the traditional principle, and there are differences in coating amount.
Adopting spiral trapezoidal screw, it has the characteristics of manual operation, simple stability, vertical and lying dual-use, the maximum load is 500N, and the tensile force is Travel 200mm. It is suitable for tensile and compressive load, insertion and unplugging force, and failure test.
With bar and Drawdown blade two Spreader mode, using clamshell Drawdown blade head and new bar Installation method, easy to clean. Spreader speed and length can be freely adjusted, film thickness control accuracy is high, suitable for Glass, cardboard and other substrates.
Wire-wound process, wet film thickness 6μm, application width 140mm, stainless steel material to ensure durability and accurate Spreader effect, suitable for preparing uniform film samples.
Wire-wound structure ensures uniform film, wet film thickness 64.0 microns, application width of 300mm, suitable for a variety of surface preparation materials.
Spreader accuracy of +/- 0.001mm, rate 5~ 180mm/s adjustable, using vacuum adsorption and wire Rod Spreader mode, heating temperature RT +~ 180 ℃, UV light curing main peak wave 365nm, support stepless variable speed and a variety of customized functions, to ensure film uniformity and stability.
