High dispersion efficiency and no need to clean, Crankshaft Rotation speed 660rpm, up and down amplitude 16mm, vertical structure equipped with shock absorber spring, support bottle and can two Operating Mode.
Silicone oil standard solution, calibrated viscosity 380cp, capacity 400ml, suitable for Viscometer calibrating.
Silicone oil standard liquid viscosity value 11000cp, capacity 400ml, specially designed for Viscometer calibrated, providing stable and reliable viscosity reference standards.
Range 5-50p, accuracy of +/- 2%, equipped with 5 kinds of special calibrated oil to ensure measurement accuracy, as the core component of cone-plate viscoMeter to ensure test Stability.
The equipment has high dispersion efficiency and no need to clean, the crankshaft Rotation speed is 660rpm, the upper and lower amplitude is 16mm, the clamping capacity is 2L, and the Floor-Standing structure is equipped with shock absorber springs, which is stable and convenient to operate.
With 0.1mg High Accuracy and +/- 0.1mg repeatability error, ABS engineering plastics are used to enhance corrosion resistance, support full scale peeling and four-level shock resistance to ensure stable measurement.
Adopt ABS engineering plastics to enhance corrosion resistance, four-stage shock-proof design to ensure stable weighing, Readability up to 0.1mg, with transparent Draft Shield and RS-232 interface.
The ABS engineering plastic structure is sturdy and corrosion resistant, with an accuracy of 0.1mg, four-level shock resistance and fully transparent Glass Draft Shield design, and supports piece counting and percentage weighing functions.
500Ml capacity S6 viscosity standard oil, 20 ℃ viscosity 8.911mPa · s, 25 ℃ viscosity 7.498mPa · s, traceable to national standards, compatible with a variety of test equipment calibrating requirements.
Adapt to a variety of Viscometer use, suitable for factory field applications, real-time printing measurement results, no need to hand copy, easy operation, can save labor time.
Provides a calibrated viscosity of 71.96mPa · s (20 ° C) and 54.81mPa · s (25 ° C), fully traceable to national standards, in accordance with BS EN ISO/IEC 17025 and ISO Guide 34 certifications.
The test program can be uploaded to the Viscometer host, the analysis record data can be collected, the rheological Linear dispersion and Excel can be generated, and five sets of data can be plotted and compared at the same time.
The two-box mobile structure is adopted, the Thermal Shock mechanism moves within 10 seconds, and the temperature recovery time is within 5 minutes. It is equipped with HFC environmentally friendly refrigerant and binary ultra-low temperature freezing system, which has high cooling speed and efficiency. It supports paperless recording and real-time Linear dispersion display function.
Manufactured to ASTM D 2162 standards with dual UKAS certification, 20 ° C rotor calibrated viscosity 136.4mPa · s, 25 ° C viscosity 101.1mPa · s, providing complete traceability.
Using U-Tube Reverse Flow BS/IP/RF design, the viscosity measurement range is 60000-300000cSt, which is based on the principle that the flow time of the liquid in capillary tubing is proportional to the viscosity to ensure accurate measurement.
