Mixing method of low speed intermittent sticking barrel edge, professional Impeller design, can be thoroughly stirred in 10 minutes without heating up, Speed range 0~ 50rpm adjustable, easy to replace stainless steel Mixing Tank.
The use of low-speed intermittent barrel edge stirring, mixing inks evenly within five minutes without heating up, Speed range 0~ 60rpm, L-type paddle stirring design is clean and simple, direct transmission to reduce power loss.
Low-speed running torque output of 94N.cm, using multi-stage Non-metallic gear transmission force, stable running state and low noise, stepless speed range of 100~ 1400rpm, suitable for a variety of Impeller and containers.
The blade width is 100mm and the height is 60mm, and the Rod length is 300mm, generating tangential flow and high shear rate to prevent medium deposition, making it suitable for low-speed stirring.
When stirring, a tangential flow is generated, and a high shear rate is formed at the edge to prevent medium deposition. The blade width is 100mm and the height is 60mm, and the Rod diaMeter is 8mm, which is suitable for low-speed and mild stirring.
Made of stainless steel, with a diaMeter of 60mm and a Rod length of 300mm, it is suitable for efficient mixing of medium and low viscosity liquids. Medium and high speed operation provides stable mixing effect.
The series micro motor provides 94N.cm Max. Torque, multi-stage Non-metallic gear drive to achieve torque doubling, support 100-1400rpm stepless speed regulation and 28L Processing capacity, stable operation and low noise.
Three cutting methods are available, with a maximum cutting diaMeter of 30mm. It is equipped with a 7-inch Touchscreen and a fully enclosed safety protection structure. The work surface is made of stainless steel, and fast clamps and vertical clamps are provided to meet different sample clamping needs.
With 70mm diaMeter slurry and 8mm Rod diaMeter design, the mixing performance is mild, suitable for medium and low speed operation, can effectively handle the medium that needs gentle stirring, and avoid excessive turbulence.
Made of stainless steel, the diaMeter of the slurry is 60mm, and the diaMeter of the Rod is 8mm. It is suitable for efficient mixing of medium and low viscosity liquids. The structure is simple and durable, and the mixing effect is uniform and stable.
Made of stainless steel, with a diaMeter of 50mm and a Rod length of 300mm, it is suitable for medium and low viscosity mixing, and medium and high speed stirring pRoduces uniform flow.
Max. stirring Capacity 1000mL, Speed range 0-1600rpm, using magnetic field drive technology implementation of non-contact stirring, suitable for a variety of low viscosity liquid mixing needs.
Using series micro motor and multi-stage Non-metallic gear drive, Max. Torque reaches 94N.cm, Speed range 100-1400rpm, stable operation, low noise and support for a variety of Impeller adaptations.
The use of low-speed intermittent barrel edge mixing, L-shaped paddle mixing design can be completed in five minutes uniform mixing, Speed range 0~ 60rpm, mixing process inks do not heat up, clean simple.
The non-contact mixing method is adopted to avoid sample contamination, the speed range is adjustable from 0 to 2800rpm, and various containers such as testtube beakers are supported. The mixing efficiency is dozens of times higher than that of manual mixing, and the mixing is uniform.
