The Spin Coater is controlled by touch screen, the acceleration range is 100~ 4000rpm/s, and the speed can be automatically corrected by A/K selection. The motor torque is large and the operation is smooth, which is suitable for the assembly line process.
Adopt gear pair drive, hand-pressed operation, rated load 500N, Travel 70mm, the upper and lower height of the frame can be adjusted, Force Gauge has a positioning structure, suitable for batch testing.
Adopt hand-crank mechanical pressurization method, Heating power 650W, Mold sleeve specification < 40mm, suitable for small or irregular samples, support thermosetting material inlay.
Hand-crank mechanical pressurization is easy to operate, digital temperature controller to ensure stable temperature, Heating power 440W, mold sleeve specification < 25mm, suitable for thermosetting material inlay, protect the edge of the sample.
Adopt gear pair transmission, hand-pressed operation, the height of the frame can be adjusted up and down, Force Gauge up and down movement is equipped with positioning structure, rated load 500N, Travel 70mm, suitable for batch testing.
Rated load 500N, rack and pinion drive, hand pressure operation is simple and stable, large foot design to ensure smooth measurement process, Travel 75mm, suitable for Force Gauge installation for tensile or plug force test.
Adopt 0-3000rpm stepless speed regulation, Processing capacity 10-100L, with full explosion-proof structure and hand lifting system, suitable for dispersing and mixing of high viscosity materials.
Hand pressure type is easy to operate, the rack and pinion transmission is smooth, the digital display ruler can display the displacement and lock the Travel, the maximum test load is 500N, the measurement Travel is 200mm, and the base is stable and the fuselage is heavy.
With 0.5 Precision and +/- 0.5% FS accuracy, support for peak hold and forward and reverse dual displays, measurement of 100kgf range and buzzer overload alarm for multiple force unit conversions.
Measurement range 0~ 10mm, accuracy ≤ 0.02mm, probe center to the maximum measurement depth 130mm, Dial reading, portable handheld design, suitable for on-site rapid detection.
Measurement range 0-10mm, accuracy ≤ 0.02mm, Graduation 0.001mm, probe diaMeter Φ 20mm plane, portable handheld design, in line with chemical industry standards.
Measurement range 0-1mm, Graduation 0.001mm, probe diaMeter 5mm plane design, portable handheld for rapid measurement in the workshop, in line with industry standards.
Hand type easy to operate, load 1000g, standard 6B-6H pencil, suitable for film hardness testing, test temperature 23 +/- 2 ℃ and Humidity 50 +/- 5% environment.
Measurement range 0-10mm, accuracy 0.02mm, probe center to the maximum measurement into the depth of 130mm, easy to carry handheld measurement.
Hand crank type is easy to operate, load 1000g +/- 1g, scratch speed about 1mm/s, test angle 45 °, standard 6B-6H pencil, in line with a number of international standards, through the pencil Hardness grade to accurately evaluate the scratch performance of the paint film.
