Ultra-high rigidity gantry frame structure, Accuracy grade 0.5, maximum test force 20kN, equipped with piecewise linear correction and high-speed processor to ensure High Accuracy and Stability, support a variety of deformation measurement.
With programmed vacuum cycle control, the maximum number of cycles is 99 times, and the drying time is shortened by more than 50% compared with the traditional method; equipped with a digital vacuum Gauge, the control accuracy is +/- 1% to ensure a stable vacuum environment.
Cuboid Studio improves volume utilization, drying time is reduced by more than 40% compared with traditional Vacuum Chamber, Temperature range RT + 10~ 200 ℃, Vacuum Level up to 133Pa, double-decked Glass door is easy to observe.
Equipped with programmed vacuum cycle function, drying time is shortened by more than 50%, temperature control accuracy +/- 1 ℃, support 7 groups of 63-step Program settings, digital Vacuum Level control accuracy +/- 1%.
The digital vacuum Gauge is used to automatically control the Vacuum Level, with an accuracy of +/- 1%; the heating element is located in the Shelf of the box to shorten the heating time by 50%; the special aluminum shelf conducts heat quickly and does not oxidize at high temperature, effectively improving the drying efficiency.
Cuboid Studio improves space utilization and shortens drying time by more than 40%; Double-decked Tempered Glass Door for easy observation, adjustable box door to ensure high Vacuum Level; Temperature range RT + 10~ 200 ℃, Vacuum Level up to 133Pa.
High Accuracy Platinum Resistance Sensor to achieve +/- 0.5 ℃ temperature fluctuations, Vacuum Level below 133Pa to ensure safe drying of thermosensitive substances, with over-temperature alarm and 9999 minutes timing function.
Vacuum environment significantly reduces the boiling point of liquid, suitable for heat-sensitive substances; drying Temperature range RT + 50~ 200 ℃, Vacuum Level < 133Pa; inert conditions prevent oxide explosion, powder sample stability does not move.
High Accuracy Platinum Resistance Sensor is used to realize +/- 1 ℃ temperature fluctuation, with 9999 minutes timing function, three-layer tempered Glass observation window design to ensure safe and clear observation, suitable for vacuum drying environment of thermally sensitive substances for easy analysis.
The cuboid studio improves the volume utilization rate, and the drying time is shortened by more than 40% compared with traditional equipment. Temperature range RT + 10~ 200 ℃, Vacuum Level up to 133Pa, double-decked Glass doors are easy to observe, and silicon door seals ensure high vacuum maintenance.
Cuboid studio improves volume utilization, drying time is reduced by more than 40%; Temperature range RT + 10~ 200 ℃, Vacuum Level 133Pa; double-decked Glass door is easy to observe, can be filled with inert gas anti-oxidation, stainless steel liner is durable and easy to clean.
The vacuum environment is used to reduce the boiling point of the liquid, the drying temperature can be as low as room temperature + 10 ℃, the Vacuum Level is 133Pa, the special aluminum shelf conducts heat quickly and does not oxidize at high temperature, and the double-decked Glass door is easy to observe and can be filled with inert gas.
Cuboid studios improve space utilization, drying time is shortened by more than 40% compared with traditional equipment; double-decked tempered Glass doors are easy to observe, and mechanical Dial vacuum Meters can achieve 133Pa Vacuum Level.
The rectangular studio has a large effective volume, Vacuum Level is less than 133Pa, Temperature range is + 15 ℃ to 200 ℃, High Accuracy Platinum Resistance Sensor and Tempered Bulletproof Double-decked Glass Observation Window are used.
The vacuum environment effectively reduces the boiling point of the liquid and prevents the analysis of heat-sensitive substances; the Vacuum Level < 133Pa ensures efficient drying; the microcomputer PID control realizes accurate temperature control; the multi-layer independent heating system makes the temperature distribution more uniform.
