It can measure the surface roughness of the hole with an aperture greater than 2mm, and the maximum depth is 9mm. It supports both flat and cylindrical measurement, and is suitable for a variety of special-shaped surface detection needs.
Using electric heating to directly generate high voltage steam, the highest Operating temperature 135 ℃ and accuracy of 0.1 degrees, with time temperature level control and automatic pressure chill down, 3 minutes after cooking items can be reduced to 20-40 ℃.
The four-blade design realizes gentle mixing, with a pulp blade diaMeter of 100mm and a Rod length of 500mm. It is suitable for medium and low speed operation, and the stainless steel material ensures durability.
40.5Mm aperture design, suitable for 3-hole sample tube, high temperature resistant metal material to ensure stable heating, suitable for a variety of experimental needs.
Using high toughness knife body material, total length 242mm, knife length 142mm, log handle with bottle cap and hanging hole design, improve the use of strength and easy operation.
Mixing performance is mild, suitable for medium and low speed conditions, pulp diaMeter 100mm, Rod length 400mm, stainless steel material to ensure durability, suitable for soft mixing needs.
Made of stainless steel, the diaMeter of the slurry is 50mm, the Rod length is 400mm, and the stirring performance is mild, which is suitable for medium and low speed operation and can effectively achieve a soft stirring effect.
The high toughness knife body enhances the use strength, the log handle feels comfortable to hold, the tail is integrated with the function of opening the bottle cap and is equipped with a hanging hole, and the total length of the knife is 370mm and the length is 250mm.
Made of stainless steel, the slurry diaMeter is 50mm, the Rod length is 400mm, the mixing performance is mild, the tangential flow is generated during medium and low speed operation, the turbulence is small and the heat exchange effect is good.
High toughness knife body material to improve the use of strength, log handle with open cap and hanging hole design user-friendly, total length of 350mm knife length 230mm to meet a variety of ink needs.
The high toughness knife body design enhances the use strength, the log handle is equipped with bottle opening function and hanging hole, the total length is 415mm and the knife length is 295mm, which is suitable for the preparation of paint inks.
With 60 degree Measurement Angles and Φ 5mm small hole measurement area, support USB and Bluetooth data output, can store 254 sets of data, Automatic calibration without manual adjustment.
The high-toughness knife body material is used to improve the strength of use. The log handle is designed with the function of opening the bottle cap. The total length of the knife is 190mm and the length of the knife is 95mm. The humanized hanging hole is easy to store.
Using a 3.5mm flow hole and 50ml capacity design, the viscosity is evaluated by measurement of liquid outflow time, suitable for laboratory and field rapid testing, and the outflow time range is 20 to 100 seconds.
7Mm diaMeter outflow hole design, made of stainless steel, can be adapted to DIN viscosity Cup to achieve different test requirements, in line with the approximate DIN53211 standard specification.
