The equipment adopts scraping method, coating speed 1~ 10m/min, thickness range 0.005-3mm, equipped with automatic deviation correction and tension control to ensure uniform and stable Spreader.
Adopt scraping method, coating speed 1-10m/min adjustable, Spreader thickness range 0.005-3mm, drying tunnel temperature up to 200 ℃, equipped with adjustable drawdown blade device and thickness adjustment dial Meter to achieve precise control.
Adopt scraping method, coating speed 1-10m/min adjustable, Spreader thickness range 0.005-3mm, equipped with drying tunnel temperature RT + -200 ℃ and automatic deviation correction device to ensure uniform and stable Spreader.
Sampling diaMeter 112.8mm, Film thickness range 0.1-1 mm, can accurately cut 100cm ² standard samples, suitable for paper physical performance testing requirements.
The stamping design can cut the 15mm width sample, the parallelism of the two sides of the sampling is less than or equal to 0.025mm, and the width error is +/- 0.1mm, which meets the accurate sampling requirements of various physical performance tests of paper and Cardboard.
It adopts wear-resistant inks and thickened steel knife design, is equipped with paper cutting guide ruler and paper pressing anti-skid function, and the sampling size is 380 * 300mm to ensure accurate sampling and stable operation.
Fixed cut 15mm wide sample, sampling width error +/- 0.1mm, parallelism on both sides ≤ 0.1mm, suitable for a variety of paper test items.
The scraping speed is adjustable from 10-100mm/s, and the drawdown blade load 1.75-6 kg is adjustable. It is used with High Accuracy GrindoMeter to avoid personnel operation errors and improve test conformity.
Measurement range 10~ 1000mN, resolution 10mN, Indication Error +/- 1%, tearing power is provided by potential energy-kinetic energy conversion of pendulum, and the paper surface size is 25 * 15mm to ensure that the sample is firmly clamped.
Adopt scraping and dipping process, effective application width 300mm, Temperature control accuracy +/- 3 ℃, mechanical speed 0.1-1 m/min adjustable, equipped with magnetic particle brake and tension controller to achieve automatic tension control, suitable for a variety of Coatings.
The sampling size of the equipment is 300 * 320mm, and the parallelism of the incision is less than or equal to 0.1mm. It can accurately detect the mechanical properties such as paper tension resistance, elongation and fracture length, and meets the requirements of many national standards.
Suitable for paper or Cardboard dust degree determination, in line with national standards, the effective area of the table is 0.0625 square Meters and can be 360 ° swirl/spin, and the standard dust map area is 0.05~ 5.0mm ².
The use of 20W fluorescent light source, irradiation angle of 60 °, standard dust map area of 0.05~ 5.0mm ², the table can be 360 ° swirl/spin, to meet the needs of accurate paper dust detection.
The sampling area is 100cm ², the sampling thickness range is 0.1-1 mm, and the sampling error is +/- 0.35cm ². It is suitable for paper Basis Weight determination and sheet burst resistance test standard sample sampling.
Vacuum principle measurement paper breathability performance, Measurement range 0-1000ml/min, test area of 10cm ², suitable for a variety of industrial paper mass detection.
