Rotation speed of the ball mill can reach 1100rpm, the minimum discharge particle size is 0.1μm. It supports dry and wet milling and various material Tanks, and the grinding is uniform and efficient.
Maximum feed size 2mm, minimum discharge particle size 0.1um, support dry grinding wet grinding vacuum grinding and other methods, equipped with a variety of materials ball mill Tank, can control Rotation speed and time to ensure grinding Repeatability.
Rotation speed of the ball mill can reach 850rpm, the minimum discharge particle size can reach 0.1μm. It supports dry grinding, wet grinding and other grinding methods, and has adjustable speed rolling and intermittent operation functions.
360 degree tumbling structure combined with planetary disk swirl/spin, maximum Processing capacity 80L, minimum discharge particle size 0.1μm, support dry grinding, wet grinding, vacuum and other grinding methods, equipped with a variety of materials ball mill Tank to adapt to different samples.
Core noise reduction technology is used to reduce operating noise. The rotation ratio of planetary disk and ball mill Tank is 1:2 to pRoduce a strong crushing force. The maximum Processing capacity is 6000ml and the discharge fineness is up to 0.1μm. It supports various grinding methods such as dry and wet grinding.
With 10L Processing capacity and 0.1μm discharge accuracy, four-station design and 580rpm Rotation speed, support wet and dry grinding and vacuum grinding, configuration 600CFM cooling system and a variety of materials ball mill Tank optional, good grinding conformity.
The equipment adopts a combined structure for easy maintenance, and is equipped with a 200CFM heat dissipation system and a low center of gravity design to ensure stable operation. The maximum Processing capacity is 60L, the minimum discharge particle size is 0.1μm. It supports four ball mill Tank stations and various grinding modes.
Adapted diaMeter 16mm formed Metering Rod, the total length of 2000mm, through the special structure to correct the straightness of the Rod body, to ensure stable rotation and full contact with the substrate, improve the thickness control accuracy of Spreader.
Wet film thickness 22.9 microns, diaMeter 9.52 mm, the forming Rod uses an extrusion process to process continuous grooves, with no wire breakage and easy cleaning; the wire-wound Rod is based on the traditional principle, and there are differences in coating amount.
The linear velocity of blade disk is 10.5 m/s, the volume of material barrel is 1.8 L, and the aggregates are destroyed by strong impact and shearing to achieve high-efficiency dispersion and mixing, which is suitable for liquid material experiments.
Wet film thickness 45μm, main Rod diaMeter 10mm, effective application width 600mm, using SUS304 material, Coating Weight, length and surface preparation can be customized, suitable for a variety of Spreader conditions.
Using the formed pRoduction process, Coating Weight is about twice that of the wire-wound coating Rod, wet film thickness is 13μm, film accuracy reaches 0.5 μm, and the material is 304 stainless steel.
Equipped with 1 tie Rod and 10 adapters, the specifications cover M6 to M24, and are suitable for a variety of bolt sizes to ensure test compatibility and ease of operation.
Using 1400rpm speed regulation and 1.5 liters effective volume sand grinding basket, rapid dispersion and grinding are achieved through tensile shear and Impact between sand and material, and the operation is simple.
Using 1320rpm high-speed dispersion shaft, equipped with 30L grinding cylinder to achieve strong shear impact on the ground, sieve discharge design is easy to clean and change color, adapt to different material fineness adjustment.
