Hot Melt Adhesive Self-adhesive Coating Machine

The hot melt adhesive self-adhesive coating machine heats solid adhesive to a molten state, then evenly coats it onto the surface of the substrate through the coating head. After cooling, it forms a self-adhesive layer. It is used in fields such as labels and packaging materials to achieve fast adhesion functionality.
Selection
When selecting, consider the compatibility of the substrate type and width with the coating range, choose heating power and coating precision based on production speed, confirm temperature control stability according to the characteristics of the adhesive, and inspect the ease of equipment maintenance and safety protection configurations.

Terms

Standards

Instruments

Irreversible discoloration record historical temperature, accuracy +/- 1 ° C to +/- 4 ° C, oil, water and steam resistance, self-adhesive design for easy installation and storage.

$ 98.00

Irreversible discoloration record historical temperature, Measurement accuracy +/- 1 ℃ to +/- 4 ℃, oil and water vapor resistance, self-adhesive design for easy installation, Instant Response.

$ 96.00

Equipped with 8 Meters Oven, roller heating temperature up to 200 ℃, effective application width 500mm, Spreader thickness range 0.005-3mm, support automatic unwinding to winding process, suitable for hot-melt adhesive film.

$ 29120.00

Provides irreversible temperature recording with accuracy of +/- 1 ° C below 100 ° C and +/- 1.5 ° C from 100 ° C to 154 ° C. Self-adhesive design, resistant to oil, water and steam, ensures reliable monitoring.

$ 98.00

Irreversible color change records the highest temperature, Measurement accuracy +/- 1 ℃ to +/- 4 ℃, oil and water vapor resistance, self-adhesive design for easy installation, 50 sheets to meet the needs of long-term use.

$ 98.00

Measurement accuracy +/- 1 ° C to +/- 4 ° C, oil-resistant, water-resistant and steam-resistant, self-adhesive design for easy installation, temperature grid discoloration is obvious and easy to identify.

$ 96.00

Irreversible discoloration provides permanent temperature recording, Measurement accuracy +/- 1 ℃, oil and water vapor resistance, self-adhesive design for easy installation, circular single grid structure size 12 * 13mm.

$ 96.00

Irreversible discoloration record temperature history, accuracy within 100 ° C +/- 1 ° C, oil and water vapor resistant, self-adhesive design easy to paste and remove, size 12 * 13mm, 50 sheets per copy.

$ 98.00

Irreversible discoloration provides long-term temperature recording, self-adhesive design for easy sticking, oil, water and steam resistance, accuracy below 100 ° C is +/- 1 ° C, Response is instant and inexpensive.

$ 96.00

Irreversible discoloration provides permanent temperature recording, Measurement accuracy +/- 4 ℃, oil resistance, water resistance and steam resistance, self-adhesive design for easy installation, Response instant no power supply, size 12 * 13mm compact and portable.

$ 98.00

Irreversible Color change for long-term temperature recording; Resistant to oil, water and steam; Temperature accuracy is +/- 1 ° C below 100 ° C and +/- 1.5 ° C from 100 ° C to 154 ° C; Self-adhesive design for easy use and storage.

$ 93.00

Irreversible discoloration provides long-term temperature recording, Measurement accuracy +/- 1 ℃ to +/- 4 ℃, oil resistance, water resistance and steam resistance, self-adhesive design is easy to use, temperature grid size 12 * 13mm round.

$ 96.00

Irreversible discoloration records the highest temperature, self-adhesive design for easy installation. Measurement accuracy +/- 1 ° C to +/- 4 ° C, oil and water vapor resistance, round single cell structure size 12 * 13mm, providing long-term temperature history.

$ 98.00

Using irreversible Color change technology, six-grid temperature measurement range of 132 ° C to 160 ° C, accuracy +/- 1.5 ° C, oil and water vapor resistance, self-adhesive design for easy installation and long-term recording.

$ 93.00

The thickness range of Spreader is 0.01mm~ 2mm, the minimum gluing thickness is 0.01mm, the coating surface density ≤ +/- 1.5%, the dial Meter is used to fine-tune the gap and the Teflon baffle to adjust the width, and it supports forward and reverse continuously variable speed and automatic winding.

$ 4269.00

Articles

Laboratory rod coater for submicron wet film preparation of photoresist.
This article introduces the process of using a laboratory bar coater to prepare submicron wet films of photoresist.
Application of Perovskite Coater in the Preparation of Intermediate Layers in Tandem Solar Cells
This article introduces the application of perovskite coating machines in the preparation of the intermediate layer of tandem solar cells.
Using a spray coater to achieve the preparation of functionally graded films.
This paper introduces a method for preparing functionally gradient films using a spray coating machine.
Application of Spray Coating Machines in the Encapsulation of Flexible Electronic Devices
This paper introduces the application of spray coating machines in the encapsulation of flexible electronic devices.
Roll-to-Roll Preparation of Perovskite Coaters for Flexible Perovskite Solar Cells
This article introduces the roll-to-roll fabrication method of flexible perovskite solar cells.
Operation Tips for Laboratory-Scale Hot Melt Adhesive Coating Machines
This article introduces the key operational points of a laboratory-scale hot melt adhesive coater. The equipment is primarily used in laboratories to apply hot melt adhesives uniformly onto substrates, supporting the research, development, and testing of adhesives.
Application of Continuous Coating Machine for Lithium Battery Electrode Preparation in Electrode R&D
The laboratory continuous coater is a key piece of equipment in lithium battery electrode research and development, used to simulate mass production coating processes. By precisely controlling parameters such as coating speed, thickness, and tension, it helps researchers optimize slurry formulations and coating procedures.
How to Coat High-Viscosity Slurry – Parameter Setting Tips for Blade Coaters
This article primarily discusses the parameter setting techniques for high-viscosity slurries on blade coaters. High-viscosity slurries exhibit characteristics such as shear thinning, so it is essential to leverage shear effects during coating to facilitate slurry spreading. After coating, the viscosity should recover quickly to prevent sagging.
Common Troubleshooting for Wire Bar Coater: Solving Issues of Streaking and Uneven Thickness
This article mainly introduces solutions to two common faults in the operation of the wire rod coater—coating streaks and uneven coating thickness.
Roll-to-roll coater enables continuous preparation of flexible electronic materials.
Roll-to-roll coating is a continuous production process that involves uniformly applying functional slurry onto a flexible substrate, followed by drying and curing to form a functional film.
What are some cost-effective alternatives to roll-to-roll coaters for the early stages of flexible film R&D when the investment is too high?
The investment in roll-to-roll coating machines is too high. What are some cost-effective alternatives for the early stages of flexible film research and development? Among blade coating, spin coating, and spray coating, which one would you choose?
Coating Process of Slurries with Different Viscosities on Vacuum Adsorption Coating Machines
This article explores the process adaptability of slurries with different viscosities on vacuum adsorption coating machines. The slurries are categorized into low, medium, and high viscosity, and their flow characteristics during the coating process, along with key process control points, are discussed respectively.
The working principle of laboratory wire rod coaters and methods for controlling coating thickness
The laboratory wire rod coater is a precision instrument used to prepare uniform, thickness-controllable wet film coatings on substrate surfaces. Its core components include a coating rod, a flat coating platform, clamps for securing the substrate, and a mechanical system that drives the coating rod to move at a constant speed.