The extrusion molding process is used to ensure continuous wire, the film thickness is precisely controlled by 20μm, the application width is 250mm to meet various needs, and the 304 stainless steel material is durable and easy to clean.
The formed integrated molding process ensures accuracy, wet film thickness 12 μ m, application width 300mm, 304 stainless steel material, durable and easy to clean.
The extrusion molding process is used to ensure accuracy, providing 47 μm wet film thickness and 300mm application width, and the 50mm handheld design on both sides of the handle is convenient for manual operation. 304 stainless steel is durable and easy to clean.
Using extrusion molding process, film thickness 105 microns, application width 250mm, diaMeter 10mm, 304 stainless steel material to ensure durability and accurate Spreader effect.
The formed integrated molding process ensures that the structure is firm, the 30 micron wet film thickness precisely controls the Spreader effect, and the stainless steel material is durable and easy to clean and maintain.
Can be prepative 9.1 micron wet-film, application width 300mm, using formed pRoduction process, suitable for ultra-thin Spreader process, high accuracy.
Adopt integrated injection molding measurement frame and transparent water Tank, anti-corrosion and drop resistance; density readability 0.001g/cm ³, Capacity 300g; support a variety of liquid media, rapid testing suitable for field applications.
Suitable for high voltage molding sand test, compression stroke 2.50mm, load 1500g, with average calculation and MAX Maximum latch function, support USB and Bluetooth data communication.
The extrusion molding process is used to ensure the uniformity of the coating, the wet film thickness is 100μm, the application width is 250mm, and the stainless steel material is durable and easy to clean and maintain.
Made by molding process, wet film thickness 137.2μm, application width 300mm, stainless steel material to ensure durability, easy to clean and not easy to break wire.
Using molding process to ensure unbroken wire, film thickness 32.0 μ m, effective application width 300mm, suitable for a variety of Adhesive sample Spreader.
Using the formed pRoduction process, Coating Weight is about twice that of the wire-wound coating Rod, wet film thickness is 13μm, film accuracy reaches 0.5 μm, and the material is 304 stainless steel.
303 stainless steel material, wear and corrosion resistance, wet film thickness 25.1 microns, there are two types of molding and wire-wound structure, molding type without broken wire and easy to clean and not easy to block.
Wet film thickness 22.9 microns, diaMeter 9.52 mm, the forming Rod uses an extrusion process to process continuous grooves, with no wire breakage and easy cleaning; the wire-wound Rod is based on the traditional principle, and there are differences in coating amount.
Film Film thickness 22.9μm, Spreader width 30cm, wear-resistant stainless steel material, molding process, suitable for low viscosity glue and thermal glue experimental Spreader.
