With two test stations, the load range is 50~ 1000g, and three typical wear resistance tests of alcohol, eraser and pencil can be carried out, which is suitable for wear resistance evaluation of various coatings and materials.
Double station design can simultaneously carry out two sets of tests, round trip 0-50mm adjustable, test load 80-990g adjustable range, equipped with a variety of weight to meet the wear resistance performance evaluation requirements under different load conditions.
Precise load of 500g ensures test Stability and is suitable for calibrating and testing Wear resistance Testers to improve equipment performance.
Rotation speed 40rpm and roller diaMeter 150mm design, suitable for a variety of resilience material testing, abrasion Travel 40mm, test load optional 5N or 1N, to ensure efficient and accurate wear performance evaluation.
With no-segment adjustable Friction Frequency, speed range of 60 times/minute, support 10-50mm friction distance free adjustment, mirror stainless steel material, provide a variety of clamping and wear mode, power failure memory function to ensure test continuity.
Equipped with six independent stations and two Lisaru motion trajectories, it supports a maximum of 999999 counts, and adopts a movement speed of 50rpm, which can simultaneously test the wear resistance performance of multiple sets of samples.
The equipment is equipped with eight independent stations for simultaneous testing, supporting 24mm and 60.5mm Li Sharu motion trajectories, with a maximum motion range of 60.5mm. It uses a 395g fabric weight and a 2385g pressure clock system to achieve multi-standard material wear resistance evaluation.
Using the formed process, wear-resistant stainless steel material is easy to clean and anti-corrosion, the total length is 250mm, the effective application width is 250mm, and the wet film thickness is 400μm, which is suitable for the experimental needs of preparing thicker films.
303 stainless steel material, wet film thickness 105.2 μ m, good surface finish, wear resistance and corrosion resistance, suitable for high abrasion and high viscosity experiments, easy to operate and uniform film.
Double groove structure improves test accuracy, range 0~ 200μm, Graduation 10μm, support μm, Hegman, mils three units, 304 stainless steel material to ensure wear resistance and corrosion resistance.
Made of 303 stainless steel, it features outstanding wear and corrosion resistance, with a wet film thickness of 34.3 microns and a coating width of 300 mm, making it suitable for high-viscosity experimental environments.
Wet film thickness of 25.1 microMeters, made of stainless steel for wear and corrosion resistance. Available in two types: formed type and wound wire type. The formed type has no broken wires, is easy to clean, and less prone to clogging.
Made of 303 stainless steel, excellent wear resistance and corrosion resistance, wet film thickness 34.3 microns, application width 300mm, suitable for high viscosity experimental environment.
Made of wear-resistant and corrosion-resistant alloy steel, with a Hardness of 52 +/- 2HRC, it has upper and lower working surfaces to improve work efficiency and tool life.
Using formed process, wear-resistant stainless steel material is easy to clean and anti-corrosion, the total length is 400mm, the effective application width is 300mm, and the wet film thickness is 550μm.
