Computerized Color Assessment Instrument

A computer colorimeter illuminates a sample with its built-in light source, and the sensor captures the reflected light, converting it into digital signals. The color difference is then analyzed by comparing it with a standard color library. It is used for color quality control in industries such as coatings and plastics to ensure color consistency between batches.
Selection
When selecting, consider matching the measurement aperture to the sample size, choose analysis software that includes the required color space, confirm that the instrument's inter-instrument agreement meets industry standards, and select a model with specular reflection exclusion based on the sample material.
Type
Measurement method
Caliber
light source
integrating sphere
Chromatic value repeability
Measurement shape
software
Special features

Terms

Instruments

Equipped with five Illuminant system, supports D65, TL84 and other Standard light sources, the interior is coated with Moncel gray N5.5, the width is 60cm, and the multi-point Illuminant observation system enhances the accuracy of color evaluation.

$ 4022.00

Imported matte aluminum reflector to achieve uniform lighting, equipped with six kinds of Illuminants including D65 and UV, table size 700 * 530mm to meet a variety of color requirements.

$ 687.00

With four Illuminant automatic switching function, display the use time of each Illuminant, no need to warm up without flashing, Color temperature range covers 2700K to 6500K, low energy consumption without heating, support Metamerism detection.

$ 354.00

High Accuracy ball screw drive, fully computerized data collection system, 0.5 level force measurement accuracy and 1/300000 force value resolution, support three closed loop control and custom test method.

$ 3946.00

With eight Illuminant automatic switching and Metamerism functions, no preheating and no flickering, low energy consumption and no heat generation, high luminous efficiency, Illuminant includes D65, TL84, etc., and the color temperature covers 2700K to 6500K.

$ 525.00

With five Illuminant system, Color temperature coverage 2700K to 6500K, no need to warm up without flashing, automatic switching Illuminant and display the use time, low energy consumption without heating, support Metamerism function.

$ 403.00

With six Illuminant automatic switching function, no need to warm up without flashing, low energy consumption without heating, display the use time of each Illuminant, support Metamerism detection, Color temperature coverage 2700K to 6500K

$ 369.00

Standard light sources covering 6500K to 2700K Color temperature range, support UV detection; no need to warm up and open immediately, low energy consumption without heating; Illuminant use time can be displayed, with 45 ° standard stand optional.

$ 315.00

With Metamerism function, no need to warm up without flashing, including seven kinds of Illuminant including D65 (6500K) and UV (365nm), automatically switch Illuminant and display the use time.

$ 477.00

Imported aluminum surface reflector and uniform light cover, good light uniformity, CRI ≥ 95, Color temperature 6500K, can open the design for easy replacement of lamps, behind the hook and load-bearing steel chain for easy hanging.

$ 557.00

Six kinds of Illuminant are optional, with Metamerism function, no need to preheat and do not flash, fast and reliable detection; low energy consumption, no heat, high luminous efficiency, can display Illuminant use time and switching times.

$ 332.00

Standard light source without preheating, can automatically switch and record the use of time, the use of composite engineering plastic baseplate to ensure ten years without yellowing, support Metamerism detection function.

$ 396.00

With CRI = 98 high color rendering index and 6500K color temperature, lamp with Timer, all-metal structure, large folio size for easy operation, can be hung and installed to ensure accurate Color comparison.

$ 719.00

Equipped with six Illuminant configurations, including D65, TL84, CWF, F, UV, U30, etc., Illuminant automatically switches, no preheating and no flashing, low energy consumption and no heating, can display the use time and switching times, and supports Metamerism function.

$ 590.00

Standard light source with six automatic switching function, no need to preheat and do not flash, low energy consumption without heat, high luminous efficiency, Dimension 1310x600x800mm, support Illuminant use time recording.

$ 800.00

Articles

Spectrophotometer measures ink spectral reflectance and opacity.
This article introduces how to measure the hiding power of ink using a spectrophotometer. The instrument irradiates the ink sample, measures its reflectance within the visible light spectrum, and calculates the hiding power using the Kubelka-Munk model.
The combination of hiding power chart paper and a spectrophotometer enables the digital evaluation of hiding power.
This article introduces how to combine hiding power cards with spectrophotometers to achieve digital assessment of hiding power.
Colorimeter evaluation of color difference in anodized coloring layers
This article explains how colorimeters are used to evaluate color differences in anodized coloring layers. It describes how colorimeters convert colors into numerical values based on international standards and quantify color variations by calculating the color difference ΔE.
Cylindrical Mandrel Bending Tester for Detecting Flexibility of Coatings
This article introduces how the cylindrical shaft bending tester detects the flexibility of paints. Flexibility refers to the ability of the paint film to resist cracking when the substrate is bent.
A spectrophotometer uses digital language to describe colors, making color differences impossible to hide.
A spectrophotometer measures the color of an object through spectral analysis, converting reflected light data into spectral curves. It then calculates chromaticity parameters such as L*a*b* based on international standards, achieving a digital representation of color.
How to Interpret Color Difference Lab Values Measured by a Spectrophotometer? Save This Color Difference Judgment Standard Now!
This article explains how spectrophotometers measure and evaluate color differences using the Lab color space. In the Lab values, L represents lightness, while a and b indicate the red-green and yellow-blue color biases. The color difference ΔE is calculated using a formula to quantify the variation between a sample and the standard.