The equipment is designed according to the international coating stain resistance experimental method, the water Tank volume is 5L, the inner diaMeter of the flow pipe is 8mm, and the time control range is 0~ 99h99s. It is suitable for the stain resistance test of building exterior coatings.
The equipment has a 15-liter large-capacity water Tank and an 8mm inner diaMeter water pipe, supports 0 to 99 hours of time control, adopts stainless steel structure and automatic control device, and is suitable for coating stain resistance testing.
Double grinding head assembly configuration, total weight 1500g, Reciprocating Frequency 37 +/- 2 times/min, Travel 300mm, can accurately evaluate the stain resistance of the film.
Using stain removal rate evaluation method, scruf speed 37cpm, load 1000g, can accurately adjust the liquid Flow rate, by measuring the reflection coefficient changes to evaluate the stain resistance of coatings.
Adopt stainless steel water Tank structure, equipped with 8mm inner diaMeter flow pipe, support 0-99 hours time control, can realize automatic flushing and multi-directional test of sample.
High Accuracy Time Controller and Solenoid Valve are used to automatically control the flushing time. The water Tank and pipe fittings are made of stainless steel, resistant to corrosion, small in size and light in weight, easy to install and operate, and the time control range is 0-100 hours.
Smooth matte surface does not contain plasticizer, reflectance < 4%, thickness 0.25 +/- 0.02mm, to ensure test data Repeatability and comparability, in line with national standards.
Travel 100mm, Frequency 100cpm, Friction load 1000 +/- 100g, Grinding head area 2cm ², suitable for coating solvent resistance evaluation, easy and reliable operation.
Measurement range 0~ 1250μm, suitable for LEEB220 and LEEB222 Coating thickness Gauge, Abrasion Resistance is good, suitable for a variety of nonmagnetic Coating thickness detection.
The stainless steel material has acid and alkaline resistance, wet film thickness 75μm accuracy +/- 2μm, suitable for coating applications of various substrates.
With four adjustable friction Frequency 21/43/85/106cpm, friction load 20N, support linear reciprocating friction movement, power-off memory function to ensure that paraMeters are not lost, effective analysis of coating adhesion and wear resistance performance.
Travel 100mm, Frequency 100cpm, friction load 1000 +/- 100g, grinding head area 2cm ², can accurately test the coating solvent performance.
Adopt reciprocating friction method, Friction Frequency 0~ 2.5Hz, Test Travel 12.7~ 50.8mm, can simulate coating abrasion during transportation, support continuous test 0~ 24 hours.
Can test inks multi-directional adhesion at the same time, Friction Frequency 43cpm, Friction Load 2lb/4lb, Abrasion Resistance evaluation by measurement density or Coating thickness reduction, support 0-99999 automatic shutdown.
Using stainless steel material to ensure acid and alkaline resistance, wet film thickness 100μm accuracy of +/- 2μm, suitable for a variety of pRoduct coating and in line with industry standards.
