4-Sided frame design, provide 30/50/75/100μm variety of film thickness selection, application width 80mm, stainless steel corrosion resistance, in line with GB/T 1727 standard, to ensure uniform film.
Using a set of 3 designs can be prepared for 12 kinds of film thickness, wet film thickness range of 30-600μm, Moulding process Coating does not spill, suitable for a variety of substrate surface Spreader.
Stainless steel material to ensure durability, wet film thickness 30-120μm optional, accuracy +/- 2μm, application width 60mm, can be used with Automatic Film Applicator.
Stainless steel material ensures durability, wet film thickness range of 300-600μm, accuracy +/- 4μm, suitable for low viscosity liquid Spreader, can be combined with Automatic Film Applicator to achieve uniform Spreader.
Moulding accuracy, small size, can be prepared 12 kinds of wet film thickness, range 30-600μm, Spreader width is not less than 60mm, especially in the Moulding process Coating does not spill.
The 4-sided coating Applicator can be prepative of four wet film thicknesses, the conversion angle is easy to operate, the accuracy is +/- 3μm, the stainless steel material is resistant to acid and alkali erosion, and the application width is 80mm.
Using stainless steel 1Cr17N2 material, wet film thickness 50-200μm adjustable, accuracy +/- 3μm, application width 60mm, suitable for low viscosity liquid Spreader, can be used with Automatic Film Applicator.
The 4-sided structure can prepare 12 kinds of film thickness, the wet film thickness range is 30-100μm, the accuracy is +/- 2μm, the application width is not less than 60mm, and the coating does not spill during the Moulding process.
The device can be prepared with 12 wet film thicknesses, ranging from 30-600μm, accuracy up to +/- 002-0.012 mm, 4-sided design to ensure that the coating does not spill, suitable for a variety of substrate surface Spreaders.
A set of three can cover 30-400μm wet film thickness range, application width 80mm, stainless steel corrosion resistance, in line with GB/T 1727 standard.
4-Sided film Film thickness can be 30/60/90/120μm, accuracy +/- 2μm, made of high Hardness stainless steel, smooth surface, wear-resistant and corrosion-resistant, support custom specifications.
4-Sided design Spreader 125/150/175/200μm four wet film thickness, application width 80mm, stainless steel corrosion resistance, in line with national standards.
The 4-sided film design can be used for the preparation of four kinds of Film thickness at one time, the accuracy is controlled within +/- 2μm, the high-Hardness stainless steel material Hardness reaches 50~ 55HRC, and the effective Spreader width is 80mm.
4-Sided wet-film Spreader design, application width 160mm, accuracy +/- 2μm, high Hardness stainless steel material, Hardness 50~ 55HRC, to ensure experimental accuracy and durability.
Equipped with 0.5/0 7/1.0 mm three thickness die frame, using baseplate fixed structure to ensure film uniformity, metal drawdown blade design to meet long-term use needs.
