Temperature control accuracy of +/- 0.5 ℃, equipped with eight standard test force, can accurately determine the melt flow performance of polymers at high temperatures, to meet a variety of material testing needs.
Adopting MCU to adjust power and temperature control mode, temperature control accuracy +/- 0.5 ℃, with eight standard test force, can meet the needs of different material testing, suitable for melt flow performance measurement at high temperature.
Temperature range 50~ 400 ℃, thermostatic accuracy +/- 0.5 ℃, equipped with eight standard test force, can accurately determine the flowability and viscosity of polymers in molten state and other physical properties.
Using Hastelloy heating cylinder to avoid high temperature oxidation, dual Sensor temperature control accuracy of +/- 0.5 ℃, support strong corrosion plastic test, with four minutes countdown and RS232 data output function.
Equipped with 8 Meters Oven, roller heating temperature up to 200 ℃, effective application width 500mm, Spreader thickness range 0.005-3mm, support automatic unwinding to winding process, suitable for hot-melt adhesive film.
Equipped with 7-inch Touchscreen operation interface, supports high-speed data transmission of gigabit network port, measurement accuracy of +/- 2%, temperature control accuracy +/- 0.1 ℃, with automatic lifting and anti-static design.
Hall flow rate swirl/spin Sensor, can measure pollution turbid water flow, speed range 0.01-5 m/s, flow measurement error ≤ 1.5%, support -10 ℃ to 50 ℃ environment temperature work, simple and lightweight structure and low power consumption.
Velocity range 0.01-5 m/s, flow measurement error ≤ 1.5%, support sewage environment test, simple and lightweight structure, Degree of automation is high, stable and reliable.
Velocity range 0.01-10 m/s, flow measurement error ≤ 1.5%, using measuring Rod positioning measurement method, lightweight structure and support automatic calculation of flow rate formula.
Made of stainless steel, with a flow hole diaMeter of 3.0 +/- 0.01mm and a viscosity range of 7-40mm ²/s, it is suitable for testing the outflow time of Newtonian or near-Newtonian liquids and meets ISO and GB standards.
Speed measurement range: 0.01-6.00 m/s, flow measurement error ≤1.5%, lightweight and portable structure, high degree of automation, capable of stable operation in sewage environments.
Flow rate of spray 0-80CFM adjustable, spray distance 3-4 feet, visualize airflow direction and speed, support 30 minutes of continuous spray, easy flow and pressure equilibrate test.
Bakelite Cup body and stainless steel filter, flow time 0~ 150 seconds, flow hole diaMeter of 4mm, capacity of 100ml, in line with GB/T 1723 standard, can be used with the bracket to improve Stability.
Using the measuring Rod positioning measurement method, the speed range is 0.01-10 m/s, the flow measurement error is less than or equal to 1.5%, with liquid crystal display and LED backlight, supporting -10 ° C to 50 ° C environment temperature, simple and stable structure.
The quasi-closed Glass damper prevents external air flow from penetrating, the dual-gear adjustable air volume system maintains the wind speed of 0.3~ 0.6m/s, the 304 stainless steel countertop is resistant to corrosion and easy to clean, and the purification efficiency reaches 100 levels.
