Can measure 20~ 1000J/m ² Internal Bond Strength, resolution of 0.001lbf/in ², using 90 ° Impact Angle test principle, clamping force 0~ 40kg/cm ² adjustable.
The two-stage gravity overlap structure ensures accurate measurement, with a resolution of 0.001 lbf/in ², supports fully automatic release and real-time calibrating, and is suitable for internal bond strength testing of various sheet materials.
Using 7.0 inch touch screen display and hydraulic viscose sample pressing technology, the pressure is automatically adjusted, the Test accuracy reaches 0.01J/m ², the whole machine has strong rigidity to reduce vibration energy loss, and is suitable for a variety of Cardboard interlayer bonding force detection.
The scribing needle is used to act vertically on the film, the load range is adjustable from 0-2000g, the minimum increment is 50g, and the diaMeter of the steel ball is 1mm, which can accurately determine the minimum weight required to cut the paint film.
The paint film adhesion was measured by the circular trace method, the drawing diaMeter was 0-10.5 mm, and the Working Travel was 80mm. The integrity of the paint film was evaluated according to seven grades, and the operation was simple and reliable.
Measurement range 20~ 1000J/m2, resolution up to 0.01J/m2; Impact angle 90 °, can accurately test the internal bond strength, suitable for multi-layer paper quality control.
It can cut 140mmx25.4mm samples, sampling thickness ≤ 1mm, Operating temperature 20~ 40 ℃, suitable for auxiliary sampling of Internal Bond Strength test.
Rotation speed 80rpm, Working Travel 80mm, in line with international standards, to ensure accurate and reliable film adhesion assessment.
The paint film adhesion was measured by the circular trace method, the drawing diaMeter was 0~ 10.5mm, and the Working Travel was 80mm. The integrity of the paint film was evaluated according to seven grades, and the operation was simple and reliable.
Using pneumatic adhesive sample pressing and automatic release, the test range is 0-1000J/M ², the accuracy is 0.001J/M ², the Z-direction failure energy is measured by pendulum Impact measurement, and the structural rigidity is strong to reduce energy loss.
Hydraulic pump is used to uniformly pull off the test column, the speed does not exceed 1MPa/s, the test force is directly displayed by liquid crystal, and the adhesion failure and cohesion failure can be distinguished, with an accuracy of +/- 1% F.S.
Impact angle of 90 °, can test 5 groups of specimens at the same time, the minimum reading value is 0.005 kg-cm, the mechatronics design is compact, and meets the requirements of many international standards.
Glass thickness and air interlayer thickness can be measured at the same time. Glass thickness range is 70mm, air interlayer range is 34mm, light and portable operation is simple.
The adhesion was measured by the circular trace method, the drawing diaMeter was 0~ 10.5mm, and the Working Travel ≥ 80mm. The integrity of the paint film was evaluated by seven grades, and the operation was simple and conformed to the GB/T1720 standard.
Using high-performance ARM processor and 24-bit sampling chip, Measurement range 0-1000J/m ², accuracy < 1J/m ², with automatic testing and intelligent judgment functions, equipped with micro-printer real-time output data.
