Using film lamination technology, with excellent solvent and chemical resistance, paper Film thickness 0.29mm, surface Laminating to ensure Spreader uniformity, with annotation section for easy recording of test data.
White part reflectance 80 +/- 2, black part reflectance less than 1, surface smoothing anti-Curl, suitable for 0.1 square Meter spreading rate test, wettability is good for checking.
Using non-fluorescent paper substrate, white reflectance 80 +/- 2, black reflectance < 1, Laminating design enhances Curl resistance, 0.1 square Meter standard area is suitable for spreading rate testing.
Black part reflectance less than 1, white part reflectance 80 +/- 2, no Laminating design to enhance paint wettability, avoid checking or cissing, suitable for specific spreading rate brushing tests.
Spreader speed 5~ 180mm/s, Spreader area 400 * 300mm, using Metering Rod & doctor blade and vacuum adsorption system to ensure Spreader uniformity and Stability, can be customized automatic inking function.
Adapted diaMeter 16mm formed Metering Rod, the total length of 2000mm, through the special structure to correct the straightness of the Rod body, to ensure stable rotation and full contact with the substrate, improve the thickness control accuracy of Spreader.
Rotation speed increases with the folding design, the blade diaMeter of 90mm, 300mm Rod length, suitable for high-speed mixing operation in narrow containers.
Equipped with 1 tie Rod and 10 adapters, the specifications cover M6 to M24, and are suitable for a variety of bolt sizes to ensure test compatibility and ease of operation.
The extrusion molding process is used to ensure continuous wire, the film thickness is precisely controlled by 20μm, the application width is 250mm to meet various needs, and the 304 stainless steel material is durable and easy to clean.
The folding blade structure automatically adjusts the development angle with the Rotation speed, the stainless steel material ensures durability, the diaMeter of the pulp sheet is 90mm and the length of the 650mm Rod is suitable for mixing high viscosity fluids in narrow containers.
Wet film thickness 22.9 microns, diaMeter 9.52 mm, the forming Rod uses an extrusion process to process continuous grooves, with no wire breakage and easy cleaning; the wire-wound Rod is based on the traditional principle, and there are differences in coating amount.
Rotation speed of the folding design automatically adjust the blade angle, pulp diaMeter 90mm, 300mm Rod length, suitable for high-speed mixing in narrow containers, can pRoduce strong turbulence and high shear force.
Equipped with 8 kinds of diaMeter shaft Rods of 2-12mm, made of wear-resistant stainless steel, easy to operate without assembly, each shaft Rod is engraved with diaMeter numbers for easy identification and use.
Drawdown blade and bar two coating methods, support speed and length adjustment, high film thickness control accuracy, and with Vacuum chuck function, easy to handle soft substrate, easy to clean.
Rotation speed increases with folding design blade automatic expansion, pulp diaMeter of 90mm with 10mm Rod diaMeter, designed for high-speed mixing conditions in narrow containers, suitable for all kinds of liquid mixing treatment.
