Tensile Strength and elongation paraMeters can be detected, test force 500-3000N optional, accuracy +/- 1%, stepless speed 1-500mm/min, suitable for all kinds of paper and Cardboard materials.
Test method to achieve tensile compression test, Accuracy grade 1, equipped with 7-inch touch screen display tensile curve, support 50 kinds of fixtures to meet more than 1000 material testing needs.
Accessories can detect buttons and other fixed strength, to prevent loosening caused by sharp edge angle damage, the maximum tensile force of 30kg, suitable for clothing toys footwear and other pRoducts adhesion testing.
Measurement accuracy +/- 1%, force value resolution 1/200000, with breakpoint ratio 0~ 99% adjustable function, support tensile, tensile shear, tear and other mechanical properties test, with Travel limit and overload protection.
Adopt 0.5 level accuracy Sensor and 0.5-500 mm/min stepless speed regulation, support tensile, compression, tearing and other tests, with peak hold and fracture automatic stop function.
Can measure 20~ 1000J/m ² Internal Bond Strength, resolution of 0.001lbf/in ², using 90 ° Impact Angle test principle, clamping force 0~ 40kg/cm ² adjustable.
Using ball screw and 3 guide shaft drive mechanism, Measurement range 0-1000N, support a variety of sample size and tensile speed adjustment, built-in thermal printer and RS232 Communication interface.
Adopt horizontal structure and High Accuracy deceleration servo drive system, equipped with precision ball screw and double linear slide rail, force value resolution up to 0.001N, support a variety of stop modes and unit selection, can realize stepless speed regulation function.
Using horizontal structure and High Accuracy deceleration servo drive system, equipped with 0.001N force value resolution and 0.001mm Displacement resolution, supports multiple stop modes and unit selection, suitable for accurate mechanical properties testing of thin sheet materials.
Adopt Closed-loop Control mode to ensure High Accuracy test, speed adjustment range 1-500mm/min, equipped with cross latch universal joint to ensure the concentricity of the sample, support fixed elongation measurement value and fixed force measurement elongation function.
The ball screw drive is used to ensure smooth and accurate operation, the force value range is 500N resolution 0.01N, and a variety of test procedures are integrated to support professional testing such as tensile disbonding and tearing.
Control mode closed loop to ensure accuracy, Force Measurement range 500N, displacement rate 1-500mm/min stepless speed regulation, equipped with cross pin universal joint to ensure concentricity, support stretching, disbonding, tearing and other test modes.
Full digital control AC motor, speed accuracy of 0.5%; aluminum extrusion sealing plate built-in double roller screw structure, Test speed range of 0~ 300mm/min, with upper and lower limit and overload protection function.
With 1/100000 power resolution and 400 times/sec sampling Frequency, support 1-500mm/min stepless stretching, using rapid sensing protection device and precision ball screw to ensure stable and reliable testing.
Adopt ball screw drive to ensure smooth and accurate operation, Precision force value of +/- 1%, integrated tensile, disbonding, tearing and other test procedures, support 0.05~ 500mm/min speed range, automatic shutdown protection.
