The three-roll extrusion grinding principle is adopted, the diaMeter of the roller is 65mm, the processing viscosity is 3 million cps, and the temperature can be controlled by chilling down water. The material of the roller can be selected from cemented carbide or zirconia ceramics.
The three-roll extrusion grinding principle is used to process materials with a viscosity of up to 3 million cps. The roller can control the temperature rise through chilled down water. The roller speed range is 23-178rpm. It supports the customization of ceramic materials such as zirconia and is suitable for paste grinding with high fineness requirements.
Adopt Cr12 steel roll, Hardness reaches HRC52 °~ 58 °, surface roughness 0.2~ 0.1, speed ratio 1:3:9, easy to operate and low noise, suitable for efficient grinding of various materials.
Adopting three-roll extrusion friction grinding principle, Rotation speed 28-152rpm adjustable, fineness of grinding up to 15μm, Hardness HS70 ° above the surface of cold hard alloy steel roller, support water chilling down system, suitable for high viscosity material processing.
Three rollers are used to crush each other to destroy the molecular binding force, and the material is crushed and mixed. The size of the roller is 65x135mm, the rotation speed of the middle roller is 88rpm, and the particle size of the starting material is 50~ 100μm.
Adopt Cr12 steel roll, Hardness reaches HRC52 °~ 58 °, Surface Hardness 0.2~ 0.1, easy to operate and easy to change color, suitable for fine grinding of material viscosity 30~ 8000cps range.
Three rollers are used to squeeze each other and friction at different speeds to achieve grinding. The roller material is cold hard alloy cast iron, with surface Hardness HS70 ° or more, and the fineness of grinding can reach 15μm, which is suitable for high viscosity material processing.
The surface of three rollers is extruded and rubbed at different speeds to achieve grinding. The diaMeter of the roller is 65mm, and the fineness of grinding can reach 15μm. It is suitable for fine grinding and dispersion of high viscosity materials.
Three rollers are used for mutual extrusion and friction at different speeds to achieve grinding. Hardness of the roller surface is above HS70 °, and fineness of grinding can reach 15 μm, which is suitable for grinding dispersion of high viscosity materials.
Adopt horizontal three-roller extrusion grinding, roller clearance hand adjustment, maximum processing viscosity 3000000cps, roller can be cooled down water temperature control, fineness control precision, suitable for a variety of viscosity materials.
Roller diaMeter 65mm, processing capacity 0.5-10 kg/h, support chill down water temperature control, emergency brake protection, can be customized ceramic roller material, to adapt to viscosity ≤ 3,000,000cps material.
Speed range 0~ 20000rpm wide adjustable, equipped with high-speed series motor and stable silicon control system, integrated photoelectric speed measurement to ensure accurate reading, compact structure and convenient operation.
Adopt thyristor high-speed adjustment system, photoelectric speed measurement electronic circuit to ensure reliable Rotation speed, homogenization knife Speed range of 22000rpm, Processing capacity 1000ml, easy to operate and intuitive reading.
Sampling speed up to 1920Hz, equipped with three test modes and 99 sets of data storage, can automatically calculate statistical values and support upper and lower limit qualification judgment, suitable for high-speed Impact twist detection scenarios.
Using D type High Accuracy Impact device, Measurement range 30~ 110HS, can detect cast steel roll, forged steel roll and cast iron roll three kinds of hardness of materials, with anti-Impact and anti-electromagnetic interference ability, support 7 kinds of Hardness standard automatic conversion.
