Using the formed pRoduction process, Coating Weight is about twice that of the wire-wound coating Rod, wet film thickness is 13μm, film accuracy reaches 0.5 μm, and the material is 304 stainless steel.
Wet film thickness 92 microns, diaMeter 10 mm, 304 stainless steel material extrusion process, application width 300 mm, to ensure uniform coating.
Wet film thickness 22.9 microns, diaMeter 9.52 mm, the forming Rod uses an extrusion process to process continuous grooves, with no wire breakage and easy cleaning; the wire-wound Rod is based on the traditional principle, and there are differences in coating amount.
Wet film thickness 137.2 μm, coating width 300 mm. The wire-wound structure enables the preparation of uniform coatings on both flat and easily raised substrates, while the two-end hand grip design facilitates even force distribution during operation.
The extrusion molding process is used to ensure the uniformity of the coating, the wet film thickness is 100μm, the application width is 250mm, and the stainless steel material is durable and easy to clean and maintain.
Using a formed pRoduction process, the wet film thickness is 76 μm, the accuracy is 0.5 μm, and the 304 stainless steel material is used to ensure durability.
Using formed pRoduction process, wet film thickness 6 microns, accuracy 0.5 microns, 304 stainless steel material to ensure durability and cleaning convenience, no risk of wire breakage.
Using the formed pRoduction process, the wet film thickness is 6 microns, the accuracy is 0.5 microns, the cleaning is convenient and there is no worry of broken wire, to ensure the precision and durability of the coating prepative.
Support bar and Drawdown blade double coating method, suitable for high, medium and low viscosity materials; coating speed 1~ 300mm/s stepless adjustable, Blade Coating accuracy +/- 3μm; equipped with innovative clamshell magnetic Drawdown blade and simple bar installation, easy to clean and load; Heating and Vacuum chuck function to improve Spreader mass.
Wet film thickness 45μm, main Rod diaMeter 10mm, effective application width 600mm, using SUS304 material, Coating Weight, length and surface preparation can be customized, suitable for a variety of Spreader conditions.
Support bar and Drawdown blade two coating methods, suitable for different viscosity materials. Equipped with heating and Vacuum chuck function, servo motor to ensure stable operation. Drawdown blade film thickness control accuracy is high, uniform film.
Using a formed pRoduction process, the film thickness is 100 microns, the application width is 300mm, and the stainless steel material ensures durability and Spreader uniformity.
Employing an extrusion production process, the coating thickness is 105 microns, the coating width reaches 300 mm, and the coating accuracy can achieve 0.5 microns, ensuring coating uniformity and high-precision control.
Adopt gear pair drive, hand-pressed operation, rated load 500N, Travel 70mm, the upper and lower height of the frame can be adjusted, Force Gauge has a positioning structure, suitable for batch testing.
Using a formed pRoduction process, the wet film thickness is 52 microns, the application width is 300 mm, and the stainless steel material ensures durability and easy cleaning, suitable for hand-held operation.
