Winding speed 1-20R/min adjustable, free tension 25N-250N stepless adjustment, support 2-5mm diaMeter wire test, maximum output torque 40N.m, to meet the needs of different wire diaMeter detection.
Using wire-wound design, uniform groove is formed by precision winding stainless steel wire, wet film thickness control accuracy reaches 4 μm, application width 220mm, to ensure uniform coating and repeability.
Wire-wound design wet film thickness 11.4μm, wire diaMeter Φ 0.13mm, not easy to block and easy to clean, suitable for a variety of substrates, to achieve uniform Spreader and flexible thickness adjustment.
A wet film of 100.6 microMeters was prepared using a wire-winding process, with a coating width of 300 mm. The film thickness was precisely controlled using a steel wire with a diaMeter of 1.12 mm, and the extrusion process eliminated the need for wire winding.
Adopting a wire-winding process, with a wet film thickness of 107.4 μm, a total length of 400 mm, and a coating width of 300 mm. Made of durable and easy-to-clean stainless steel, it is suitable for high-viscosity applications, and features an ergonomic grip design for even pressure application.
Using a wire-winding process, it precisely controls a wet film thickness of 64.0 microns, with stainless steel material ensuring durability and consistency.
The equipment adopts dual-station synchronous unwinding and thermostatic hot pressing technology, the bonding speed is adjustable from 2-10m/min, the hot pressing temperature is room temperature to 200 ° C, the line pressure is 5-50N/mm, and it is equipped with automatic deviation correction and full closed-loop tension control to ensure the material alignment accuracy and stable winding.
Wire-wound process is prepared with 6.9 μm wet-film, and the diaMeter of the steel wire is only 0.08mm. If the hair is thin, seamless winding reduces the risk of broken wire, and is suitable for a variety of fluid Spreader applications.
Maximum Spreader width up to 1000mm, Spreader speed 1-10m/min adjustable, support unlimited length Spreader and automatic winding, forward and reverse stepless speed change, discharge and receiving reel tension adjustable, heating Rod and glue slot can be quickly disassembled to clean up residual glue.
Wet film thickness 68.6μm, coating width 300mm, pRoduced using a wire-wound process, with stainless steel material ensuring durability and precise coating performance.
Wet film thickness 22.9 microns, diaMeter 9.52 mm, the forming Rod uses an extrusion process to process continuous grooves, with no wire breakage and easy cleaning; the wire-wound Rod is based on the traditional principle, and there are differences in coating amount.
Featuring a seamless winding process with 0.08mm fine steel wire, a wet film thickness of 6.9μm, suitable for coating various fluids, and a diaMeter of 9.52mm ensures stable coating performance.
The precision drawing stainless steel wire winding structure is adopted, and the wet film thickness is precisely controlled by the groove. The closed winding design supports 4-120 μm coating, and the spiral winding can reach 500 μm thickness.
Precision drawing stainless steel wire winding manufacturing, groove control wet film thickness accurate, repeatability, closed winding Spreader thickness of 4 to 120 μ m, spiral winding up to 500 μ m, diaMeter 9.5mm total length 570mm.
Manufactured using a wire-winding process, with a wet film thickness of 41.1 μm and a coating width of 300 mm. Made of durable stainless steel, it is suitable for preparing thin coatings on various soft materials.
