Colourless Glass material, inner diaMeter accuracy of +/- 0.05mm, height tolerance of +/- 1mm, to ensure the accuracy of Color Comparison and Experimental Repeatability.
Colorimetry with platinum and cobalt, measurement range 0.00~ 100PCU, resolution 0.01PCU, imported high luminance Illuminant life of 100,000 hours, Optical inspection stability, support data storage and printing functions.
Equipped with 18 standard color level solutions, in line with GB/T1722 standards, using visual ratio method, suitable for Color Determination, Test Ambient Temperature 23 +/- 2 ℃, to ensure accurate and reliable results.
Equipped with 18 standard color scale solution, prepared according to GB/T1722-92 standard, using an inner diaMeter of 10.75mm Glass testtube, Color comparison is carried out in the Color Assessment Cabinet to ensure accurate measurement results.
Supports more than 30 chroma indicators, Measurement accuracy ≤ E * ab ≤ 0.01, single measurement only takes 1.5 seconds, minimum liquid addition is as low as 1ml, equipped with thermostatic sample tank and 7 inch Touchscreen.
Imported long-life Illuminant and narrowband filter system, Optical inspection stability, absorption value drift less than 0.002A within 20 minutes, repeability ≤ 3%, support users to calibrate Linear dispersion.
Supports iron-based and non-iron-based material measurement with accuracy of +/- 1~ 3% or +/- 2.5 µm, provides split Probe for enhanced maneuverability, automatically recognizes matrix materials and remembers calibrated values.
Imported long-life Illuminant and narrowband filter system, Optical inspection stability, 20 minutes drift less than 0.002A, support users to calibrate Linear dispersion, suitable for a variety of water quality testing.
Imported long-life Illuminant and narrowband filter system, Optical inspection stability, 20 minutes drift less than 0.002A; can store 10 Linear dispersion and 500 data, support USB interface upload, anti-corrosion case design.
Measurement range 0-50 degrees, Indication Error no more than +/- 5%, Zero calibrated and fullness calibrated, direct reading without Reagent, IP65 Protection Rating and battery powered.
With iron-based and non-iron-based dual-use function, resolution up to 0.1um, test range 0~ 1250um, support single and continuous measurement, automatic identification of matrix material, stable and portable operation.
Measurement range 0-999 ppb with accuracy +/- 20 ppb +/- 5% for rapid iron concentration detection.
Measurement range 0-500mg/L, no reagents and digestion, 1-2 minutes rapid determination, built-in cold light source life of 100,000 hours, support a variety of data transmission methods.
Using magnetic Induction and eddy Current dual principle, Measurement range 0~ 1250μm, Probe with line can measure grooves and complex positions, automatically identify iron and non-iron substrates, with single point and two point Adjustment.
Measurement range 0.00-5 mg/L, Color intensity is proportional to concentration, providing 100 tests, suitable for the analysis of iron content in various liquid samples.
