Support HDMI, WIFI and SD card three output, 1920 * 1080 resolution, can directly control camera paraMeters through USB mouse, embedded image capture and video recording, suitable for a variety of detection scenes.
Made of stainless steel, the thickness is only 1.5mm, the range is 20~ 200μm, Division 20μm, the card design is convenient for quick measurement of wet-film Coating thickness on site.
Using a wire-wound coating process, with a wet film thickness of 32.0 μm and a coating width of 300 mm, it is suitable for substrates prone to curling and convexity, enabling uniform wet film coating, with a wire diaMeter of 0.36 mm.
Wet film thickness 50μm, total length 700mm, effective application width 600mm, support custom Coating Weight and surface preparation, to meet the needs of different substrate uniform Spreader.
Using the formed pRoduction process, Coating Weight is about twice that of the wire-wound coating Rod, wet film thickness is 13μm, film accuracy reaches 0.5 μm, and the material is 304 stainless steel.
The equipment performs 180 ° reciprocating folding test at a fixed speed of 87 times/minute, supports a variety of sample sizes (longest 88mm, widest 63mm), the thickness is suitable for materials ≤ 0.5mm, and is equipped with numerical control display to monitor the number of folds in real time.
Manufactured using a wire-winding process, with a wet film thickness of 41.1 μm and a coating width of 300 mm. Made of durable stainless steel, it is suitable for preparing thin coatings on various soft materials.
Formed design Coating Weight is about twice the wide-wound drawdown bar, wet film thickness 13μm, film accuracy of 0.5 micron, 304 stainless steel material to ensure durability.
Measurement range 0-20mm, accuracy 0.001mm, contact pressure 20 +/- 5kPa, suitable for paper, Cardboard and sheet material Film thickness detection, in line with a number of international standards.
Formed process design, wet film thickness 20μm, effective application width 500mm, stainless steel material easy to clean and corrosion resistance, can precisely control the fluid and maintain coating uniformity.
Provide 30μm wet film thickness and 600mm application width, made of SUS304 material, groove design can achieve precise Coating Weight control, support a variety of customized surface preparation solutions.
Using a formed process, the film thickness is 64 microns, the total length is 2000mm, the stainless steel material is easy to clean and not rusting, installed in the pRoduction equipment to control Flow rate and maintain coating uniformity.
The black and white half design is easy to observe the covering effect, the size is 194 * 260mm to meet the standard test requirements, and the non-Laminating surface ensures the detection accuracy, which is suitable for laboratory film performance evaluation.
Using SUS304 stainless steel material, wet film thickness 52μm, main Rod diaMeter 10mm, effective application width 600mm, groove design can achieve accurate Coating Weight control.
Adopt clamshell type Blade Coating head design, easy to clean; coating speed 1~ 300mm/s stepless speed regulation, Spreader accuracy up to +/- 0.003mm, to meet the laboratory High Accuracy film needs.
