Adopting the principle of the inclined rolling ball method, the adhesion is measured by the short contact between the steel ball and the sample, the adjustment range of the tilt angle is 0-60 °, and the rolling ball of 1/32 to 1 inch is supported. The width of the test area is 80mm.
Adopting the test principle of inclined rolling ball method, the tilt angle adjustment range is 0~ 40 °, equipped with 32 GCr15 bearing steel balls, and the shape tolerance accuracy exceeds GB/T308 level 40 to achieve accurate initial Tack evaluation.
Using reciprocating motion to simulate transportation abrasion, Friction Frequency 0~ 2.5Hz adjustable, Test Travel 12.7~ 50.8mm, support continuous test 0~ 24 hours, suitable for a variety of can sizes and pressure conditions.
Can test inks multi-directional adhesion at the same time, Friction Frequency 43cpm, Friction Load 2lb/4lb, Abrasion Resistance evaluation by measurement density or Coating thickness reduction, support 0-99999 automatic shutdown.
Can set the moving distance 0.5-4 inches, speed 2-60 back and forth/minute and load 350-2100g, support a variety of abrasion media, stable and accurate testing, in line with a number of international standards.
Equipped with an electronic display 6-bit counter to realize automatic shutdown, the test disc Rotation speed is adjustable from 0-70, and supports multiple types of abrasive wheels and loads of 250g to 1000g to meet the testing requirements of different material standards.
Scruf Travel 20-300mm adjustable, speed range 1-60cpm, equipped with TFT full color display and intelligent Operating interface, supports manual testing and is compatible with a variety of standard accessories, suitable for coating Abrasion Resistance evaluation.
Rotation speed is stable with stepper motor drive, working wheel Rotation speed 60/70rpm adjustable, supports two test configurations of paint film and wood, and the friction track is mesh to avoid directional defects.
Adopt reciprocating friction method, Friction Frequency 0~ 2.5Hz, Test Travel 12.7~ 50.8mm, can simulate coating abrasion during transportation, support continuous test 0~ 24 hours.
Rotation speed is stable with stepper motor drive, working wheel Rotation speed 60/70rpm adjustable, equipped with different specifications abrasive wheels and turntable components, support multi-material wear test, avoid friction directional defects.
Adopt arc reciprocating motion mode, provide four adjustable speeds (21-106rpm) and 2lb/4lb friction load, support 0-999999 automatic shutdown tests, suitable for Abrasion Resistance evaluation.
Measurement range 0~ 1250μm, suitable for LEEB220 and LEEB222 Coating thickness Gauge, Abrasion Resistance is good, suitable for a variety of nonmagnetic Coating thickness detection.
With four adjustable friction Frequency 21/43/85/106cpm, friction load 20N, support linear reciprocating friction movement, power-off memory function to ensure that paraMeters are not lost, effective analysis of coating adhesion and wear resistance performance.
Using standard sand free fall brushing layer, straight grinding to expose 4mm substrate; can quantify the abrasion per unit thickness of the paint layer of sand volume, the inner diaMeter of the catheter 19mm, sample holder 45 degrees angle fixed.
Can set the moving distance 0.5-4 inches, Rotation speed 2-60 times/min and other paraMeters, support wet and dry abrasion test, can test any size or shape sample, ensure test Stability and accuracy.
