CATEGORIES

    Continuous Stirring Machine

    Overview Products Knowledge Standards Terms
    The continuous mixer uses rotating blades to keep materials in constant motion within the container, achieving uniform dispersion and reaction. It is used in industries such as coatings and inks for the preparation of liquids or slurries, ensuring consistency between batches.
    Selection
    When selecting, consider matching the stirring power with the material viscosity, determine the capacity specifications based on production output, use corrosion-resistant materials to suit the chemical environment, employ sealing structures to prevent leaks, and prioritize ease of maintenance to impact usage costs.
    Material
    Mixing Effect
    Lifting method
    Capacity
    Viscosity
    Speed range
    Temperature
    Timing function
    Explosion-proof
    Automation

    Terms

    Laboratory Variable Speed Stirrer
    Variable Speed Stirrer
    Laboratory Variable Frequency Stirrer

    Standards

    Active GB/T 46063-2025
    Continuous fiber reinforced ceramic matrix composite—Test method for hoop tensile properties of tubes at room temperature
    Active GB/T 46065-2025
    Continuous fiber reinforced ceramic matrix composite—Test method for axial tensile properties of tubes at room temperature
    Active GB/T 4909.9-2009
    Test methods for bare wires - Part 9: Test for continuity of coating - Sodium polysulfide solution method
    Active GB/T 27720-2011
    Calculation method of energy equilibrium and energy efficiency in Kamyr continuous cooking system
    Active GB/T 13893-2008
    Paints and varnishes - Determination of resistnace to humidity - Continuous condensation
    Active GB/T 21868.3-2008
    Pigments and extenders - Methods of dispersion for assessment of dispersion characteristics - Part 3: Dispersion using a high-speed impeller mill

    Instruments

    HUXI Vortex-D Mixer Optional Magnetic Stirring Vortex Mixing Microplate Oscillation
    HUXI Vortex-D Mixer Optional Magnetic Stirring Vortex Mixing Microplate Oscillation

    With magnetic stirring function, the maximum stirring capacity of 2000ml, Speed range 200-2500rpm, vibration range 4.5mm, support point and continuous operation mode switching.

    $ 359.00
    HUXI Vortex-DS Mixer Magnetic Stirring Vortex Mixed Microplate Oscillation
    HUXI Vortex-DS Mixer Magnetic Stirring Vortex Mixed Microplate Oscillation

    With point and continuous operation mode, Speed range 200-2500rpm, reinforced engineering plastics and TPU work surface, acid and alkali wear resistance, support magnetic stirring and microplate adaptation.

    $ 378.00
    CHIJIU 85-2A Magnetic Stirrer Max. stirring Capacity 5L
    CHIJIU 85-2A Magnetic Stirrer Max. stirring Capacity 5L

    Max.stirring Capacity 5L, stirring speed 0~ 2000rpm, using strong magnetic drive, suitable for medium capacity stirring, smooth and continuous operation.

    $ 170.00
    CHIJIU H03-A Magnetic Stirrer Single Stirring Stainless Steel Working Face
    CHIJIU H03-A Magnetic Stirrer Single Stirring Stainless Steel Working Face

    Max. stirring Capacity 10L, stirring speed 100-2000rpm, stainless steel face, strong stirring force suitable for high viscosity liquid, Continuous Operating Mode.

    $ 238.00
    CHIJIU 85-1A Magnetic Stirrer Max. stirring Capacity 2L
    CHIJIU 85-1A Magnetic Stirrer Max. stirring Capacity 2L

    Maximum stirring capacity 2 liters, Speed range 100 to 2000 rpm, Compact structure suitable for small capacity stirring, Continuous Operating Mode to ensure stable operation.

    $ 141.00
    HUXI Vortex-DS Mixer Magnetic Stirring Vortex Mixed Microplate Oscillation
    HUXI Vortex-DS Mixer Magnetic Stirring Vortex Mixed Microplate Oscillation

    Rotation speed 2500rpm, can handle 2000ml volume sample, integrated magnetic stirring, vortex mixing and microplate oscillation multi-function.

    $ 396.00
    CHIJIU 98-2 Magnetic Stirrer Strong magnetic force single stirring, large capacity and high viscosity stirring
    CHIJIU 98-2 Magnetic Stirrer Strong magnetic force single stirring, large capacity and high viscosity stirring

    Driven by brushless DC motor, Max. stirring Capacity up to 10 liters, stirring speed range of 150-2000rpm, with super stirring force, suitable for high viscosity liquid stirring.

    $ 227.00
    SILE INTRUMENT 96-1 Magnetic Stirrer High Power DC Brushless Motor 50L Stirring Capacity
    SILE INTRUMENT 96-1 Magnetic Stirrer High Power DC Brushless Motor 50L Stirring Capacity

    High-power DC brushless three-phase motor, no spark and high efficiency, Max. stirring Capacity 50L, Speed range 50~ 1500rpm, strong magnetic force design is suitable for continuous stirring of low to high viscosity liquids.

    $ 530.00
    SILE INTRUMENT 85-1 Magnetic Stirrer Max. Stirring Capacity 1000mL Rotation speed 100~ 1300rpm
    SILE INTRUMENT 85-1 Magnetic Stirrer Max. Stirring Capacity 1000mL Rotation speed 100~ 1300rpm

    With 100~ 1300rpm wide range speed regulation ability, Max. stirring Capacity up to 1000mL, using non-ferromagnetic container compatible design, compact size and support continuous Operating Mode.

    $ 146.00
    BANTE JB-1A Mini Magnetic Stirrer DC Motor Speed Regulation, Maximum Stirring Capacity 2 Liters
    BANTE JB-1A Mini Magnetic Stirrer DC Motor Speed Regulation, Maximum Stirring Capacity 2 Liters

    The DC motor is used to achieve continuous speed regulation from 0 to 1250rpm, the maximum stirring capacity is 2 liters, the operation is stable and the noise is low, and it can work continuously for a long time, and the solution quickly forms an eddy current.

    $ 141.00
    CHIJIU MYP13-2S Magnetic Stirrer Single Stirring, Three Phase Brushless DC Motor Closed Loop Control
    CHIJIU MYP13-2S Magnetic Stirrer Single Stirring, Three Phase Brushless DC Motor Closed Loop Control

    Rotation speed is stable, Max. stirring Capacity 5L, stirring speed 60~ 2000rpm, strong magnetic steel stirring force, corrosion resistant engineering plastic shell.

    $ 186.00
    CHIJIU MYP13-2 Magnetic Stirrer Single Stirring Corrosion Resistant Engineering Plastic Shell
    CHIJIU MYP13-2 Magnetic Stirrer Single Stirring Corrosion Resistant Engineering Plastic Shell

    Brushless DC motor with strong magnet, strong stirring force; Maximum stirring capacity of 3 liters, Speed range up to 1500 rpm; Corrosion resistant shell and stainless steel face to ensure long-term stable operation.

    $ 162.00
    CNSHP CH1215T-4J Magnetic stirring High temperature Thermostatic Bath Four-hole independent magnetic stirring
    CNSHP CH1215T-4J Magnetic stirring High temperature Thermostatic Bath Four-hole independent magnetic stirring

    Four-hole independent magnetic stirring can be stepless speed regulation and display Rotation speed, Temperature range 15~ 120 ℃, Temperature Fluctuation +/- 0.05 ℃, 4-sided Glass design is easy to observe sample changes.

    $ 1492.00
    BANTE MS400 Heating Magnetic Stirrer Stirring Time Maximum Heating Temperature 400 ° C
    BANTE MS400 Heating Magnetic Stirrer Stirring Time Maximum Heating Temperature 400 ° C

    Maximum heating temperature 400 ° C, stirring speed 0~ 1250rpm, support external temperature sensor automatic thermostatic, key Rotation speed setting to prevent stirringRod stall, large screen LCD display temperature and stirring status.

    $ 259.00
    CHIJIU 90-1 Magnetic Stirrer Large Capacity Single Stirring Brushless DC Motor Drive
    CHIJIU 90-1 Magnetic Stirrer Large Capacity Single Stirring Brushless DC Motor Drive

    Rotation speed is smooth and not affected by Power supply frequency, torque is 73.5mN · M, magnetic force is particularly strong, suitable for large capacity stirring, Max.stirring Capacity 20L, speed range 60-2000rpm.

    $ 311.00

    Articles

    Lab Mixer Selection - Viscosity Determines Torque
    This article mainly discusses how to select a laboratory mixer based on the viscosity of the material. The higher the viscosity, the greater the torque required. Low-viscosity liquids are suitable for high speed and low torque, while high-viscosity materials require low speed and high torque.
    Application of Wet Film Wheel Gauge in Continuous Measurement of Wet Film Thickness for Large-Area Coatings
    The wet film wheel gauge is a mechanical tool used to measure the thickness of wet coatings, operating based on the geometric relationship of three coaxial disks (two parallel outer wheels on the sides and an eccentric inner wheel in the middle).
    Negative Pressure Method Sealing Tester for Detecting Leakage in Food Packaging
    The negative pressure method seal tester creates a pressure difference inside and outside the packaging by evacuating air to detect leaks in food packaging. If there is a leak in the packaging, water will enter the packaging or produce continuous bubbles under the pressure difference, thereby determining the seal integrity. The test requires controlling parameters such as vacuum level and time, and should be conducted in accordance with relevant standards.
    Cupping tester evaluates the ductility of coatings.
    The cupping tester is a detection device used to evaluate the ductility of coatings under biaxial tension. During the test, the punch presses the sample into the die until the first continuous crack appears in the coating, at which point the penetration depth of the punch is recorded as the cupping depth.
    The Role of Roll-to-Roll Coating Machines in Photoresist Coating for Semiconductor Packaging
    The roll-to-roll coating machine achieves efficient production through continuous unwinding, coating, and rewinding processes. It utilizes precise coating methods to control the thickness of the adhesive film and is suitable for coating materials such as flexible substrates.
    Application of Roll-to-Roll Coating Machines in the Energy Storage Field
    A roll-to-roll coating machine is a continuous coating equipment. Its core process involves uniformly applying slurry onto the surface of a flexible substrate (such as metal foil or polymer film), followed by steps like drying and rolling to produce continuous coated materials.
    How to choose between the rolling ball method and the inclined plate method for initial tack testing instruments
    The rolling ball method and the inclined plane method are two commonly used techniques for testing the initial tack of adhesive materials. When selecting an instrument, factors to consider include the material's application scenario (such as adhering to spheres or anti-slip on inclined surfaces), the requirements of industry testing standards, and the data needs (discrete grades or continuous numerical values).
    Application of Continuous Coating Machine for Lithium Battery Electrode Preparation in Electrode R&D
    The laboratory continuous coater is a key piece of equipment in lithium battery electrode research and development, used to simulate mass production coating processes. By precisely controlling parameters such as coating speed, thickness, and tension, it helps researchers optimize slurry formulations and coating procedures.
    Roll-to-roll coater enables continuous preparation of flexible electronic materials.
    Roll-to-roll coating is a continuous production process that involves uniformly applying functional slurry onto a flexible substrate, followed by drying and curing to form a functional film.