Low-speed running torque output of 94N.cm, using multi-stage Non-metallic gear transmission force, stable running state and low noise, stepless speed range of 100~ 1400rpm, suitable for a variety of Impeller and containers.
The blade width is 100mm and the height is 60mm, and the Rod length is 300mm, generating tangential flow and high shear rate to prevent medium deposition, making it suitable for low-speed stirring.
Using series micro motor and multi-stage Non-metallic gear drive, Max. Torque reaches 94N.cm, Speed range 100-1400rpm, stable operation, low noise and support for a variety of Impeller adaptations.
The series micro motor provides 94N.cm Max. Torque, multi-stage Non-metallic gear drive to achieve torque doubling, support 100-1400rpm stepless speed regulation and 28L Processing capacity, stable operation and low noise.
When stirring, a tangential flow is generated, and a high shear rate is formed at the edge to prevent medium deposition. The blade width is 100mm and the height is 60mm, and the Rod diaMeter is 8mm, which is suitable for low-speed and mild stirring.
The use of low-speed intermittent barrel edge stirring, mixing inks evenly within five minutes without heating up, Speed range 0~ 60rpm, L-type paddle stirring design is clean and simple, direct transmission to reduce power loss.
Low-speed running torque output of 94N.cm, using multi-stage Non-metallic gear transmission force, stable running state low noise, Speed range 100-1400rpm stepless speed regulation, stirring Processing capacity 28L, suitable for a variety of Impeller.
Adopt numerical control touch stepless speed regulation technology, Speed range 50-1500rpm, Max. Torque 195N.cm, stable operation and low noise, suitable for a variety of Impeller to meet different viscosity requirements.
Three cutting methods are available, with a maximum cutting diaMeter of 30mm. It is equipped with a 7-inch Touchscreen and a fully enclosed safety protection structure. The work surface is made of stainless steel, and fast clamps and vertical clamps are provided to meet different sample clamping needs.
Using series micro motor and multi-stage Non-metallic gear drive, output torque up to 195N.cm, Speed range 50-1500rpm, stable operation, low noise and support for a variety of Impeller flexible replacement.
The maximum speed is 14500rpm, the maximum centrifugal force is 14000xg, and it only takes 15 seconds to accelerate to the highest speed. The unique airflow guidance design keeps the sample low temperature, and the aluminum alloy rotor can autoclaving at high temperature for ultra-quiet operation.
The 6-well design supports 15ml capacity Sample Handling, which is suitable for a variety of Centrifuge models and provides stable centrifugal separation results.
Using series micro motor and multi-stage Non-metallic gear drive, Max. Torque reaches 94N.cm, Speed range 100-1300rpm, stable operation and low noise, suitable for a variety of Impeller to meet different viscosity requirements.
The series micro motor provides 510W input Power, Max. Torque reaches 195N.cm, supports stepless speed regulation of 50-1500rpm, and is equipped with a multi-stage Non-metallic gear transmission system to achieve stable and low noise operation.
The series micro motor provides 94N.cm Max. Torque, supports 100-1300rpm stepless speed regulation, and is equipped with a multi-stage Non-metallic gear transmission system to achieve stable and low noise operation. It is suitable for a variety of Impellers to meet the needs of different viscosity media.
