Tensile Strength and elongation paraMeters can be detected, test force 500-3000N optional, accuracy +/- 1%, stepless speed 1-500mm/min, suitable for all kinds of paper and Cardboard materials.
Test method to achieve tensile compression test, Accuracy grade 1, equipped with 7-inch touch screen display tensile curve, support 50 kinds of fixtures to meet more than 1000 material testing needs.
Accessories can detect buttons and other fixed strength, to prevent loosening caused by sharp edge angle damage, the maximum tensile force of 30kg, suitable for clothing toys footwear and other pRoducts adhesion testing.
Adopt horizontal structure and High Accuracy deceleration servo drive system, equipped with precision ball screw and double linear slide rail, force value resolution up to 0.001N, support a variety of stop modes and unit selection, can realize stepless speed regulation function.
Using horizontal structure and High Accuracy deceleration servo drive system, equipped with 0.001N force value resolution and 0.001mm Displacement resolution, supports multiple stop modes and unit selection, suitable for accurate mechanical properties testing of thin sheet materials.
With 1/100000 power resolution and 400 times/sec sampling Frequency, support 1-500mm/min stepless stretching, using rapid sensing protection device and precision ball screw to ensure stable and reliable testing.
Can measure 20~ 1000J/m ² Internal Bond Strength, resolution of 0.001lbf/in ², using 90 ° Impact Angle test principle, clamping force 0~ 40kg/cm ² adjustable.
Adopt High Accuracy Deceleration Servo Drive System, equipped with 0.001N force value resolution and 0.001mm Displacement resolution, support 1-500mm/min stepless speed regulation, with multiple shutdown modes and intelligent operation functions to ensure accurate and reliable test data.
High Accuracy deceleration servo drive system and ball screw drive, force value resolution of 0.001N, Displacement resolution of 0.001mm, equipped with 7-inch Touchscreen and dedicated measurement and control software, support a variety of test modes and Unit switch.
Measurement range 0-30N, accuracy of 0.01N, equipped with ball bearing drive and imported motor, support real-time display of tensile curve, automatic calculation of average value and Standard Deviation.
Using ball screw and 3 guide shaft drive mechanism, Measurement range 0-1000N, support a variety of sample size and tensile speed adjustment, built-in thermal printer and RS232 Communication interface.
Adopt Closed-loop Control mode to ensure High Accuracy test, speed adjustment range 1-500mm/min, equipped with cross latch universal joint to ensure the concentricity of the sample, support fixed elongation measurement value and fixed force measurement elongation function.
Using ball bearing drive and imported motor, Measurement accuracy up to +/- 1%, tensile speed 1-399mm/min adjustable, support sample size flexible adjustment and automatic data statistics function.
Control mode closed loop to ensure accuracy, Force Measurement range 500N, displacement rate 1-500mm/min stepless speed regulation, equipped with cross pin universal joint to ensure concentricity, support stretching, disbonding, tearing and other test modes.
Measurement accuracy +/- 1%, force value resolution 1/200000, with breakpoint ratio 0~ 99% adjustable function, support tensile, tensile shear, tear and other mechanical properties test, with Travel limit and overload protection.
