Double-sided design can provide 75/150μm two kinds of wet film thickness, effective Spreader width 12.7mm, wear-resistant corrosion-resistant alloy steel material to ensure accurate control of film Film thickness, to ensure coating conformity and Repeatability.
The double-sided design can provide two wet film thicknesses of 38μm and 76μm, the effective Spreader width is 12.7mm, and the alloy steel material is wear-resistant and corrosion-resistant to ensure coating conformity and Repeatability.
Made of 9Cr18Mo High Hardness Stainless Steel, Hardness up to 50-55HRC, with +/- 2μm accuracy and 4-sided film design, supports 37μm, 50μm, 75μm, 100μm Film thickness options.
The double-sided design can provide two film thicknesses of 150/300μm, using high-Hardness stainless steel material Hardness up to 50~ 55HRC, accuracy +/- 2μm and factory inspection report to ensure film accuracy.
Using aluminum alloy chuck and stainless steel pole, baseplate size 290 * 210mm, pole height 780mm, suitable for 16mm Cube lifting fixed clip, stable and durable structure.
Cube lifting fixed clamping diaMeter 16-22mm, cross buckle fixed clamping diaMeter 10-16mm, baseplate size 290 * 210mm, multi-material combination structure is stable, suitable for a variety of vertical Rods and extension Rods.
Adopting 500 * 700mm Dimensions, used with bar or Film Applicator, is conducive to the smooth and effective film, and improves the convenience of film operation.
The 4-sided coating Applicator can be prepative of four wet film thicknesses, the accuracy is +/- 3μm, the application width is 80mm, the stainless steel material is resistant to corrosion, and the operation is simple only need to change the angle.
The 4-sided coating Applicator can be prepative of four wet film thicknesses, the conversion angle is easy to operate, the accuracy is +/- 3μm, the stainless steel material is resistant to acid and alkali erosion, and the application width is 80mm.
Accurate single film, providing 38/76μm two film thickness selection, application width 12.7mm, accuracy of +/- 2μm/+/- 3μm, suitable for linear Drying Time Recorder.
High Hardness stainless steel material, Hardness of 50~ 55HRC, film Film thickness 50μm, 100μm, accuracy +/- 2μm, smooth surface and with factory inspection report.
Cube Applicator can achieve 70/150μm double-sided Film thickness Spreader, through the hardening process to ensure that the overall uniform hardening, Spreader width 12mm, guide plate design for narrow Glass panel direct use.
Spreader width 100mm, wet film thickness 40μm, wear resistant corrosion resistant alloy steel material, can be manually operated or with automatic Film Applicator to ensure coating conformity and Repeatability.
The device can provide 75/150μm two wet film thickness, application width of 12.7mm, accuracy of +/- 2/3μm, using 1Cr17N2 material, suitable for accurate single film and comparison of different formulations.
Servo motor drive, coating speed 1~ 500mm/S adjustable, film accuracy of +/- 0.002mm, magnetic head fixed and 4-sided Applicator design to improve the convenience of operation and Spreader uniformity.
