Tensile Strength and elongation paraMeters can be detected, test force 500-3000N optional, accuracy +/- 1%, stepless speed 1-500mm/min, suitable for all kinds of paper and Cardboard materials.
Test method to achieve tensile compression test, Accuracy grade 1, equipped with 7-inch touch screen display tensile curve, support 50 kinds of fixtures to meet more than 1000 material testing needs.
Accessories can detect buttons and other fixed strength, to prevent loosening caused by sharp edge angle damage, the maximum tensile force of 30kg, suitable for clothing toys footwear and other pRoducts adhesion testing.
Control mode with high accuracy, equipped with cross latch universal joint to ensure concentricity. Measurement range 300N, speed adjustment 1-500mm/min, with pull-off stop and peak hold function.
Cross latch universal joint structure ensures concentricity, high closed-loop control accuracy, adjustable displacement rate of 1-500mm/min, load Measurement accuracy of +/- 1%, with pull-off shutdown and overload protection functions.
Control mode with closed loop, accuracy of +/- 1%, speed range of 1-500mm/min stepless speed regulation, with pull-off shutdown, peak holding function, universal joint structure to eliminate the influence of the sample.
Maximum load 0.5KN, specially designed for pull ring samples, compact structure, easy installation, suitable for tensile testing of a variety of materials, providing reliable data support.
Control mode using closed-loop high accuracy, Force Measurement range 100N, displacement rate 1-500mm/min adjustable, with pull-off shutdown and peak holding function, universal joint structure to ensure the test concentricity.
Can measure 20~ 1000J/m ² Internal Bond Strength, resolution of 0.001lbf/in ², using 90 ° Impact Angle test principle, clamping force 0~ 40kg/cm ² adjustable.
Using ball screw and 3 guide shaft drive mechanism, Measurement range 0-1000N, support a variety of sample size and tensile speed adjustment, built-in thermal printer and RS232 Communication interface.
Adopt horizontal structure and High Accuracy deceleration servo drive system, equipped with precision ball screw and double linear slide rail, force value resolution up to 0.001N, support a variety of stop modes and unit selection, can realize stepless speed regulation function.
Measurement accuracy +/- 1%, force value resolution 1/200000, with breakpoint ratio 0~ 99% adjustable function, support tensile, tensile shear, tear and other mechanical properties test, with Travel limit and overload protection.
Using horizontal structure and High Accuracy deceleration servo drive system, equipped with 0.001N force value resolution and 0.001mm Displacement resolution, supports multiple stop modes and unit selection, suitable for accurate mechanical properties testing of thin sheet materials.
Adopt 0.5 level accuracy Sensor and 0.5-500 mm/min stepless speed regulation, support tensile, compression, tearing and other tests, with peak hold and fracture automatic stop function.
Adopt Closed-loop Control mode to ensure High Accuracy test, speed adjustment range 1-500mm/min, equipped with cross latch universal joint to ensure the concentricity of the sample, support fixed elongation measurement value and fixed force measurement elongation function.
