With 0.5 accuracy and 200kg capacity, it supports a variety of disbonding tests such as 180 ° and 90 ° disbonding, automatically records Linear dispersion and analyzes MAX Maximum, MIN Minimum and Average for a variety of material inspections.
With 0.5 levels of accuracy and a speed range of 5-500mm/min, it supports automatic drawing of disbonding Linear dispersion and calculation of interval results, and can resolve MAX Maximum, MIN Minimum and Average for a variety of material tests.
With 0.5 accuracy and 5~ 500mm/min speed adjustment range, it supports automatic drawing of disbonding Linear dispersion and calculation of interval results. It can distinguish MAX Maximum, MIN Minimum and Average, and effectively Travel up to 400mm.
Precision ball screw drive and double rail structure ensure displacement accuracy of 0.001mm; support 1-500mm/min stepless speed regulation, equipped with High Accuracy Force Sensor to achieve 0.5 level accuracy measurement, with overload protection and data statistical analysis function.
The High Accuracy Sensor is used to achieve 0.5 level Measurement accuracy, supports 5~ 500mm/min speed range, and is equipped with automatic Linear dispersion analysis function, which can calculate interval results and distinguish MAX Maximum, MIN Minimum and Average.
Adopt stepper motor to achieve stepless speed regulation of 1~ 500mm/min, equipped with 500N force value Measurement range and +/- 1% accuracy level, with overload protection and limit protection functions, stable and reliable operation.
Measurement accuracy of 0.5 with High Accuracy Sensor, speed range 5~ 500mm/min, support automatic Linear dispersion analysis and multi-point data collection, tensile, tear and disbonding tests.
With 0.5 accuracy and 5~ 500mm/min speed range, using High Accuracy Sensor and stepper motor control, support automatic Linear dispersion analysis and multi-interval result calculation, effective Travel up to 400mm.
Impact angle of 90 °, can test 5 groups of specimens at the same time, the minimum reading value is 0.005 kg-cm, the mechatronics design is compact, and meets the requirements of many international standards.
Adopt 5-inch high definition Touchscreen and precision ball screw drive, Force Value Measurement range 0.01-50 N, support a variety of unit selection and intelligent calculation, with overload protection and USB data connection function to ensure accurate and stable testing.
With 0.5 accuracy and 10kg maximum load, it supports 5~ 500mm/min speed adjustment, can perform tensile, tear and disbonding tests, automatically draw Linear dispersion and analyze interval results, suitable for a variety of material inspection.
Maximum load 50Kg, Test speed 10~ 60mm/min adjustable, using pointer sensing mode, effective Travel 0~ 360mm, suitable for vertical angle disbonding test.
Full digital control AC motor, speed accuracy of 0.5%; aluminum extrusion sealing plate built-in double roller screw structure, Test speed range of 0~ 300mm/min, with upper and lower limit and overload protection function.
Measured value 500N, suitable for fabric, paper, wool, fiber, leather, rubber and other materials tensile force, destructive force and extension test, dedicated to supporting the Force Gauge test bench.
Measured value 50000N, suitable for tape, leather, paper and other sheet or block material push-pull force and destructive force test, supporting the Force Gauge test bench.
