Can measure 20~ 1000J/m ² Internal Bond Strength, resolution of 0.001lbf/in ², using 90 ° Impact Angle test principle, clamping force 0~ 40kg/cm ² adjustable.
Five sets of specimens can be tested simultaneously, supporting 0-900N compression force adjustment, with 0.005ft.lb high Accuracy grade and 90 ° Impact angle, meeting a variety of standard unit requirements.
The two-stage gravity overlap structure ensures accurate measurement, with a resolution of 0.001 lbf/in ², supports fully automatic release and real-time calibrating, and is suitable for internal bond strength testing of various sheet materials.
Using 7.0 inch touch screen display and hydraulic viscose sample pressing technology, the pressure is automatically adjusted, the Test accuracy reaches 0.01J/m ², the whole machine has strong rigidity to reduce vibration energy loss, and is suitable for a variety of Cardboard interlayer bonding force detection.
Using pneumatic adhesive sample pressing and automatic release, the test range is 0-1000J/M ², the accuracy is 0.001J/M ², the Z-direction failure energy is measured by pendulum Impact measurement, and the structural rigidity is strong to reduce energy loss.
Measurement range 20~ 1000J/m2, resolution up to 0.01J/m2; Impact angle 90 °, can accurately test the internal bond strength, suitable for multi-layer paper quality control.
It can cut 140mmx25.4mm samples, sampling thickness ≤ 1mm, Operating temperature 20~ 40 ℃, suitable for auxiliary sampling of Internal Bond Strength test.
Hydraulic pump is used to uniformly pull off the test column, the speed does not exceed 1MPa/s, the test force is directly displayed by liquid crystal, and the adhesion failure and cohesion failure can be distinguished, with an accuracy of +/- 1% F.S.
Impact angle of 90 °, can test 5 groups of specimens at the same time, the minimum reading value is 0.005 kg-cm, the mechatronics design is compact, and meets the requirements of many international standards.
Glass thickness and air interlayer thickness can be measured at the same time. Glass thickness range is 70mm, air interlayer range is 34mm, light and portable operation is simple.
Using high-performance ARM processor and 24-bit sampling chip, Measurement range 0-1000J/m ², accuracy < 1J/m ², with automatic testing and intelligent judgment functions, equipped with micro-printer real-time output data.
Accessories can detect buttons and other fixed strength, to prevent loosening caused by sharp edge angle damage, the maximum tensile force of 30kg, suitable for clothing toys footwear and other pRoducts adhesion testing.
Mechatronics design integrated measurement display circuit, manual operation with 20mm/50mm kit, range of 10KN accuracy ≤ +/- 1% F. S, with linear correction and automatic clearing function for a variety of coating platings strength test.
Using electric hydraulic pressurization device, eliminating manual labor; Measurement range 20~ 1000J/m ², resolution up to 0.01J/m ²; equipped with touch screen and thermal printer, testing is convenient and efficient.
The scribing needle is used to act vertically on the film, the load range is adjustable from 0-2000g, the minimum increment is 50g, and the diaMeter of the steel ball is 1mm, which can accurately determine the minimum weight required to cut the paint film.
