Wire-wound molding process, wet film thickness of 80 microns, effective application width of 25.5 cm, can be used at the same time Spreader a variety of Coating comparative experiments, with Drawdown Plate use effect is better.
The punch is pushed to the test plate at a constant speed of 0.2 +/-0.1mm/s, and the thickness range of the test plate is 0.30-1. 25mm, which can detect the degree of coating cracking and is suitable for testing of various materials.
Using stepless motor control film, coating speed 0~ 10cm/s adjustable, equipped with stainless steel waste collection plate, application length can be adjusted freely, saving coating cost.
Using metal layer plate structure, Temperature range -7~ 70 ℃, support 13 point temperature measurement, can simultaneously Spreader 6 samples, through drying air flow and layer temperature to achieve accurate film formation detection.
The total film width of 90mm is divided into 10 gaps, the depth is gradually increased by 25μm, and the spacing is 1.5mm. The removable guide plate design is easy to operate on different thickness test panels.
Using the formed pRoduction process, Coating Weight is about twice that of the wire-wound coating Rod, wet film thickness is 13μm, film accuracy reaches 0.5 μm, and the material is 304 stainless steel.
Spreader thickness range 0~ 10mm, coating speed 5~ 180mm/s, equipped with high flat Glass table, support stepless speed and automatic feeding function, to ensure uniform and stable Spreader.
Adopt 4mm suspension hole design to avoid the accumulation of paints, with PE protective film to prevent scratches and corrosion, 0.8mm aluminum plate material meets a number of international test standards, support horizontal and vertical suspension without leaving traces.
Formed design Coating Weight is about twice the wide-wound drawdown bar, wet film thickness 13μm, film accuracy of 0.5 micron, 304 stainless steel material to ensure durability.
Grinding hard chrome metal pressure plate, adjustable temperature range -10~ 80 ℃, equipped with 10 point temperature transducer, through drying air flow to prevent condensation, ensure test repeatability, in line with a number of international standards.
Using rigid polyester plate with foam rubber cushion, size 240x340mm, can absorb operating pressure, improve proofing Repeatability and uniformity, suitable for a variety of substrate testing.
Spreader accuracy of +/- 0.05mm, Spreader thickness range of 0~ 10mm, coating speed 5~ 180mm/s adjustable, equipped with automatic feeding system and magnetic stirring function, support bar and drawdown blade two coating methods.
Using a wire-wound coating process, with a wet film thickness of 32.0 μm and a coating width of 300 mm, it is suitable for substrates prone to curling and convexity, enabling uniform wet film coating, with a wire diaMeter of 0.36 mm.
Wire-wound process to achieve 40μm wet film thickness, one operation can simultaneously Spreader two or more Coatings, matching Drawdown Plate to improve Spreader repRoducibility, suitable for soft to strong all kinds of substrates.
With bar +/- 0.001mm and Drawdown blade +/- 0.003mm High Accuracy Spreader capability, support 1-300mm/s stepless speed regulation. The clamshell Drawdown blade design is easy to clean, Glass plate countertop ensures Spreader flatness, and optional heating function enhances adaptability.
