High-power brushless DC motor provides 130mN · m torque, supports a wide range of speed regulation from 50 to 1500rpm, with forward and reverse Stir and bi-directional Stir modes, adjustable commutation time, and temperature control accuracy of +/- 0.5 ℃.
Rotation speed up to 900rpm, discharge particle size minimum 0.1um, with forward and reverse alternating operation and intermittent grinding function, support vacuum grinding and inert gas protection, more than ten kinds of material grinding Tank to ensure no pollution.
Driven by brushless DC motor, Speed range 60~ 1500rpm, Acceleration 1~ 250rpm/s. Supports forward and reverse alternating and intermittent stirring, programmed control ensures mixing uniformity and Repeatability.
With four working stations can grind different materials at the same time, Rotation speed of 1100rpm, minimum particle size of 0.1μm, support positive and reverse alternating operation and stepless speed regulation function, high grinding conformity and safe and convenient operation.
Rotation speed of the ball mill can reach 1100rpm, the minimum discharge particle size is 0.1μm. It supports dry and wet milling and various material Tanks, and the grinding is uniform and efficient.
Maximum feed size 2mm, minimum discharge particle size 0.1um, support dry grinding wet grinding vacuum grinding and other methods, equipped with a variety of materials ball mill Tank, can control Rotation speed and time to ensure grinding Repeatability.
Rotation speed of the ball mill can reach 850rpm, the minimum discharge particle size can reach 0.1μm. It supports dry grinding, wet grinding and other grinding methods, and has adjustable speed rolling and intermittent operation functions.
360 degree tumbling structure combined with planetary disk swirl/spin, maximum Processing capacity 80L, minimum discharge particle size 0.1μm, support dry grinding, wet grinding, vacuum and other grinding methods, equipped with a variety of materials ball mill Tank to adapt to different samples.
Core noise reduction technology is used to reduce operating noise. The rotation ratio of planetary disk and ball mill Tank is 1:2 to pRoduce a strong crushing force. The maximum Processing capacity is 6000ml and the discharge fineness is up to 0.1μm. It supports various grinding methods such as dry and wet grinding.
With 10L Processing capacity and 0.1μm discharge accuracy, four-station design and 580rpm Rotation speed, support wet and dry grinding and vacuum grinding, configuration 600CFM cooling system and a variety of materials ball mill Tank optional, good grinding conformity.
The equipment adopts a combined structure for easy maintenance, and is equipped with a 200CFM heat dissipation system and a low center of gravity design to ensure stable operation. The maximum Processing capacity is 60L, the minimum discharge particle size is 0.1μm. It supports four ball mill Tank stations and various grinding modes.
Driven by brushless DC motor, Speed range 60-1500rpm, support forward and reverse automatic switching and 1-250 seconds interval time setting, microprocessor ensures accurate Rotation speed and time control of each program.
Driven by brushless DC motor, Speed range 60-1500rpm, Acceleration 1-250rpm/s. Supports forward and reverse cycle and intermittent mode, program paraMeters can be stored for a long time, Operating interface is intuitive.
Adopting digital control technology, constant speed closed-loop design ensures constant power operation at low speed, Max. Torque 900mNm, maximum viscosity 30000mPa · s, supports forward and reverse rotation and adjustable timing functions.
Support 720 ° positive and negative two-way swirl/spin, completely solving the problem of insufficient one-way mixing; the fully automatic intelligent clamping system applies force accurately according to the size of the barrel; the revolution speed is 100-200rpm, and the rotation speed is 200-400rpm, ensuring uniform and efficient mixing.
