Impact speed 3.5m/s, cantilever beam impact energy 11J, semi-automatic control to improve operating efficiency, dedicated LCD screen real-time display of information, support printing output.
With the integrated structure of cantilever beam simply supported beam, the carbon fiber swing Rod realizes no vibration Impact, high test accuracy, can automatically save 24 sets of data and calculate the average value, and the impact energy range covers 1J to 5.5J.
Cantilever structure to prevent liquid infiltration, large proportion of chilled down surface uniform heat dissipation, Speed range 60~ 2000rpm, Max. Torque 1850gcm, suitable for viscosity of 10000mPa · s liquid stirring.
The impact speed is 3.5m/s, the impact energy can be selected from 1J, 2.75J, 5.5J, and the pendulum lift angle is 150 °. It supports a variety of non-metallic material impact tests and is easy to operate.
High Accuracy swirl/spin encoder is used to collect angle and speed information, the angle resolution reaches 0.075 °, the wind resistance error is automatically corrected, the Impact speed is 3.5m/s, and the pendulum energy can be selected from 1J to 5.5J to improve the test accuracy and efficiency.
Driven by micro motor, output power 120W, Max. Torque 52N.cm, with a wide Speed range of 60~ 2000rpm and 0~ 10000mPa.s viscosity processing capability, support quick chuck fixing.
Adopting semi-automatic control, the operation is simple and efficient; the impact speed is 3.5m/s, and the impact energy of the cantilever beam is 2.75J and 5.5J; the dedicated LCD screen displays data in real time, and the test results can be printed out.
Supporting D-type Shore DuroMeter, applying 5kg test force by weight, equipped with Glass bench and adjusting nut to ensure full contact with the sample and improve measurement Stability.
Four-channel configuration with K-type Thermocouple, the sampling rate can be adjusted from 1 second to 1 minute, and the thermal insulation performance can last for 60 minutes in a 500 ° C environment to achieve full temperature tracking monitoring.
Can be used with A type or C type Shore DuroMeter, fixed load weight mass 0.75 +/- 0.05kg, hardness Gauge clamping Rod connection size M7x0.5mm, improve hardness testing accuracy and Stability.
Using S-type Sensor structure, Measurement accuracy of +/- 0.5%, with 10 data storage and automatic calculation functions, support for automatic conversion of N/kgf/lbf units, peak hold and automatic release functions can be freely set time.
Using S-type external Sensor, Measurement range 10%~ 100% FS, Indication Error less than +/- 0.5%, with peak hold and automatic unit conversion function, support Data storage and sound and light alarm settings.
The dual-channel interface can connect two Probes at the same time, support K-type -200~ 999.9 ℃ wide range, with low power error-proof system and data locking function, waterproof design to adapt to a variety of environments.
High Accuracy S type sensor accuracy of 0.5%, range 0-10KN, with pull-off automatic stop function, three operation modes optional, can directly enter the test block area display force value and strength value
Adopt DSP chip to realize fast data processing, support Multi-ParaMeter measurement such as Ra, Rz, etc., equipped with TYPE C and Bluetooth interface for data transmission, Continuous Operating Time exceeds 20 hours, and stores 100 sets of data.
