Using 140 wire metal anilox roller to control ink film thickness, flexographic samples can be quickly prepared, easy to use and clean, and high repRoducibility.
Using 100 wire metal anilox roller to control ink film thickness, it can quickly prepare flexographic samples, easy to operate and clean, and good repRoducibility.
Using 400 wire metal anilox roller to control the ink film thickness, flexographic samples can be quickly prepared, easy to use and clean, and the repRoducibility is very similar to that of conventional flexographic printing.
Using 500 wire stainless steel anilox roller and quadrilateral pyramid mesh hole, the thickness of INKS film can be precisely controlled, flexographic samples can be quickly prepared, and cleaning and maintenance are convenient.
Using 180 wire metal engraving roller to control the ink film thickness, four pyramidal mesh structure to ensure uniform Spreader, simple operation and easy cleaning, can quickly prepare samples similar to flexographic printing effect.
The extrusion process ensures that the bar is unbroken and easy to clean, the film thickness is 45μm, the total length is 250mm, and the 304 stainless steel material is durable and reliable.
The wet film thickness can be as low as 1.5μm to achieve ultra-thin Spreader; the bottom of the groove is wider, and the Coating Weight is larger; the extrusion process is adopted to avoid the problem of loose wire and broken wire, and it is easy to clean.
Using wire-wound design, uniform groove is formed by precision winding stainless steel wire, wet film thickness control accuracy reaches 4 μm, application width 220mm, to ensure uniform coating and repeability.
Using extrusion process and 304 stainless steel material, the minimum wet film thickness can be controlled by 1.5 μm, and the groove design provides greater Coating Weight to avoid wire loosening and clogging problems.
The wet film thickness can be controlled by 1.5μm, the bottom of the groove is wider and the Coating Weight is large, and the extrusion process and chrome plating surface are adopted, which is not easy to loosen the broken wire, easy to clean and not blocked.
Coating thickness is controlled by wire-wound process, wet film thickness reaches 100μm, application width 365mm, uniform groove is formed by precision stainless steel wire winding to achieve accurate Spreader.
The thickness of INKS film is precisely controlled by the 200-wire tetragonal pyramid-shaped mesh stainless steel anilox roller, which is easy to clean manually and can quickly prepare samples with highly consistent flexographic printing effects.
It can control the wet film thickness as low as 1.5μm. It adopts extrusion process and 304 stainless steel material. The bottom of the groove is wider and the Coating Weight is larger, and it is not easy to loosen and break the wire, and it is easy to clean.
Wire-wound structure, wet film thickness 4μm, diaMeter 12.7mm, total length 585mm, wire diaMeter 0.05mm, stainless steel material to ensure durability and precise coating control.
Using wire-wound process, wet film thickness 12 μ m, application width 220mm, through precision winding stainless steel wire to form a uniform groove, to achieve precise and controllable Coating thickness.
