Film thickness 0.3mm fillet Perforating design, easy to paint adhesion, hardness, Impact and other performance tests, about 70 pieces per kilogram to meet the needs of batch experiments.
Size 70x130mm Film thickness 0.3mm, rounded corners Perforating design is convenient for coating performance testing, suitable for adhesion, hardness, Impact and other film testing scenarios.
Film thickness 0.3mm fillet Perforating design, suitable for coating adhesion, hardness, Impact and other performance testing, to ensure that the film preparatory smooth and stable.
Adopt stainless steel liner and superfine Glass cotton insulation, equipped with multi-layer conductive film observation window and silicone rubber sealing. Temperature control accuracy +/- 0.5 ℃, humidity fluctuation +/- 2% RH, with independent over-temperature protection and interlocking safety device.
Double-sided uniform tin plating, surface mass I, Hardness T52, standard thickness 0.28mm, provide crimping listening plate, rounded corners with or without holes and other specifications, single batch pRoduction of 10w sheets.
Size 100x150mm, Film thickness 0.3mm, rounded corners Perforating design for easy fixing and operation, suitable for a variety of industrial coatings performance testing, to ensure the accuracy of film testing and repeability.
Using double-sided uniform tin plating process, the surface mass reaches class I, Hardness T52, standard thickness 0.28mm, to ensure accurate and reliable film test results.
The bending diaMeter of putty film cracking peeling is tested by bending test plate, and the shaft Rod size is 50mm and 100mm. It is suitable for 0.2-0 mm thick tinplate substrate, and the operation is simple and reliable.
Equipped with R25 and R50 two kinds of support film specifications, support 0.2-0 mm tinplate test plate substrate, through the rolling shaft uniform bending deformation, easy to observe the physical changes of the film.
The equipment can detect the crazing or peeling of the putty film after bending, equipped with R25 and R50 support film specifications, shaft Rod size is 50mm and 100mm in diaMeter, suitable for 0.2-0. 3mm thick tinplate plate.
Using Japanese Panasonic Compressor and binary low temperature circuit system, temperature control accuracy of +/- 0.5 ℃, equipped with stainless steel humidifier and nickel-chromium alloy heater, support programmed test and data recording function, to meet the demanding environment simulation needs.
Equipped with 0.5/0 7/1.0 mm three thickness die frame, using baseplate fixed structure to ensure film uniformity, metal drawdown blade design to meet long-term use needs.
Adopting double-decked vacuum Glass observation window and SUS304 stainless steel inner box, equipped with Japanese Panasonic Compressor and PID control technology, Temperature Uniformity ≤ 2 ℃ and supports programmed multi-stage testing to meet the demanding environment simulation requirements.
Made of stainless steel, equipped with three standard film frame thicknesses (0.5/0 7/1.0 mm), drawdown blade inner frame 150 × 70mm, can be stabilized on different substrates Preparative uniform film for subsequent performance testing.
Equipped with three standard thickness templates (1 +/- 0.05, 0.7 +/- 0.035, 0.5 +/- 0.03), the membrane frame is fixed by spring compression column, which can be prepared for performance testing.
