Using formed process, wet film thickness 35 microns, application width 400mm, continuous wire, uniform film and good repRoducibility, easy to clean after the experiment.
Wet film thickness 22.9 microns, diaMeter 9.52 mm, the forming Rod uses an extrusion process to process continuous grooves, with no wire breakage and easy cleaning; the wire-wound Rod is based on the traditional principle, and there are differences in coating amount.
Adopting spiral trapezoidal screw, it has the characteristics of manual operation, simple stability, vertical and lying dual-use, the maximum load is 500N, and the tensile force is Travel 200mm. It is suitable for tensile and compressive load, insertion and unplugging force, and failure test.
The precision drawing stainless steel wire winding structure is adopted, and the wet film thickness is precisely controlled by the groove. The closed winding design supports 4-120 μm coating, and the spiral winding can reach 500 μm thickness.
Coating thickness control of 4-120μm using wire-wound structure, spiral winding design up to 500μm thickness, with 220mm application width and 0.64mm wire diaMeter to ensure Spreader uniformity.
The wire-wound process can pRoduce a wet film thickness of 96 μm with a coating width of up to 300 mm, utilizing stainless steel material to ensure durability and precise coating control.
Support bar and Drawdown blade double coating method, suitable for high, medium and low viscosity materials; coating speed 1~ 300mm/s stepless adjustable, Blade Coating accuracy +/- 3μm; equipped with innovative clamshell magnetic Drawdown blade and simple bar installation, easy to clean and load; Heating and Vacuum chuck function to improve Spreader mass.
The wire-wound structure enables coating with a 171.5-micron thick film, while the stainless steel material ensures corrosion resistance and long-term durability. The 9.52mm diaMeter Rod body, combined with 1.91mm steel wire, ensures operational stability.
With bar and Drawdown blade two Spreader mode, using clamshell Drawdown blade head and new bar Installation method, easy to clean. Spreader speed and length can be freely adjusted, film thickness control accuracy is high, suitable for Glass, cardboard and other substrates.
Formed process to achieve 35 micron wet film thickness, uniform film and good repRoducibility, 304 stainless steel material is not easy to break and easy to clean.
Utilizing a dual coating method with wire rod and doctor blade, the coating speed is adjustable from 1 to 300 mm/s with stepless speed control, ensuring high precision in film thickness control. Equipped with vacuum adsorption and heating functions, the temperature uniformity reaches ±1°C. The flip-top design facilitates easy cleaning.
A wet film of 148.6 μm can be prepared using a wire-wound process with a 1.65 mm wire diaMeter, ensuring accurate and durable coating while preventing wire breakage issues.
Adopting a wire-wound process, with a wet film thickness of 9.1 microns and a coating width of 300mm, it is suitable for ultra-thin coating requirements, offering high precision and ease of operation.
Utilizing a wire-wound process, with a wet film thickness of 91.4 μm, a coating width of 300 mm, and durable stainless steel construction, the wire diaMeter of 1.02 mm ensures uniform coating, making it suitable for various surface treatments.
Wet film thickness 68.6μm, coating width 300mm, pRoduced using a wire-wound process, with stainless steel material ensuring durability and precise coating performance.
