Using reciprocating motion to simulate transportation abrasion, Friction Frequency 0~ 2.5Hz adjustable, Test Travel 12.7~ 50.8mm, support continuous test 0~ 24 hours, suitable for a variety of can sizes and pressure conditions.
Can test inks multi-directional adhesion at the same time, Friction Frequency 43cpm, Friction Load 2lb/4lb, Abrasion Resistance evaluation by measurement density or Coating thickness reduction, support 0-99999 automatic shutdown.
Scruf Travel 20-300mm adjustable, speed range 1-60cpm, equipped with TFT full color display and intelligent Operating interface, supports manual testing and is compatible with a variety of standard accessories, suitable for coating Abrasion Resistance evaluation.
Adopt reciprocating friction method, Friction Frequency 0~ 2.5Hz, Test Travel 12.7~ 50.8mm, can simulate coating abrasion during transportation, support continuous test 0~ 24 hours.
The stainless steel pan is used to ensure durability, and the RS232 interface is equipped for easy data transmission. It supports counting and percentage weighing, with readability of 0.1g and repeatability error of +/- 0.1g.
With a maximum range of 2000g and 2g accuracy, equipped with a full set of weight, Pan Size is Φ 175mm, compact for laboratory use.
Measurement range 0~ 1250μm, suitable for LEEB220 and LEEB222 Coating thickness Gauge, Abrasion Resistance is good, suitable for a variety of nonmagnetic Coating thickness detection.
With 0.1g High Accuracy and 3kg large weighing range, using trapezoidal pan design, support counting, AC/DC dual-use and international unit conversion functions, Stabilization time is short.
With four adjustable friction Frequency 21/43/85/106cpm, friction load 20N, support linear reciprocating friction movement, power-off memory function to ensure that paraMeters are not lost, effective analysis of coating adhesion and wear resistance performance.
With 100g maximum range and 0.1g accuracy, equipped with standard weight group, pan diaMeter 85mm, suitable for a variety of weighing scenarios, compact structure and easy to operate.
The stainless steel pan is used to ensure durability, and the RS232 interface is equipped for easy data transmission. It supports counting and percentage weighing, with accuracy of 0.1g, repeatability error +/- 0.1g, and Linearity +/- 0.2g.
Sensor and microcomputer combination, with 0.01g accuracy and 500g range, support Automatic calibration, counting function and AC/DC dual-use, trapezoidal pan design to improve Stability.
Measurement accuracy of 0.01g, weighing range of 0-600g, equipped with trapezoidal pan and external Adjustment, Stabilization time does not exceed 5 seconds, support AC/DC dual-use and counting applications.
Using standard sand free fall brushing layer, straight grinding to expose 4mm substrate; can quantify the abrasion per unit thickness of the paint layer of sand volume, the inner diaMeter of the catheter 19mm, sample holder 45 degrees angle fixed.
Measurement accuracy of 0.01g, range 2000g, equipped with trapezoidal pan and external test weight, support AC/DC dual-use and counting functions, Stabilization time does not exceed 5 seconds, suitable for a variety of environments.
