With a speed of up to 30000rpm and a processing viscosity of 10000mPas, the claw-type high-shear structure and interchangeable stator and rotor provide triple safety protection and continuous 6-speed regulation, ensuring efficient dispersion and durability.
Speed range 0-3000rpm, Processing capacity 10-100L, Electric lift Travel 700mm, can be equipped with multiple containers alternately used, stirring vibration low noise, to achieve rapid dispersion homogenization.
Equipped with a 60mm diaMeter 304 stainless steel dispersion plate, it is corrosion-resistant and easy to clean; the lifting stroke is 11 to 42 centiMeters, which can be flexibly adapted to different containers; the handling capacity is up to 25 liters, meeting the needs of medium-scale experiments.
The bottom hole and tip design are adopted, and the outflow time is determined by observing the appearance of the tip, which realizes rapid viscosity measurement and is suitable for on-site testing needs.
Standard Processing capacity 500-10000ml, suitable for HR series Disperser, suitable for efficient dispersion processing of large-volume samples.
The multi-channel mechanical compression refrigeration system is used to achieve rapid temperature change of 10 ° C/min, and the PID adaptive algorithm is equipped to ensure the Temperature Fluctuation +/- 0.5 ° C. The temperature uniformity is guaranteed by the design of the top orifice air supply.
The speed can reach 30000rpm, the processing capacity is 0.1-1000 ml, the 316L stainless steel dispersion head is corrosion-resistant and high temperature-resistant, and the handheld lightweight design is easy to operate with one hand. It is suitable for rapid shearing and crushing of samples in small containers.
Adopt multi-channel mechanical compression refrigeration system and adaptive throttling technology to achieve rapid temperature change of 5 ° C/min; Equipped with PID adaptive algorithm to ensure Temperature Fluctuation +/- 0.5 ° C, through forced air duct system to ensure temperature uniformity.
The multi-channel mechanical compression refrigeration system is used to achieve rapid temperature change of 15 ° C/min, and the PID adaptive algorithm is equipped to ensure that the Temperature Uniformity is ≤ 2 ° C, and the 512L studio meets the diverse testing requirements.
Processing capacity range of 100~ 5000ml, maximum processing viscosity of 5000CP, suitable for a variety of Disperser models, providing stable Sample Handling ability.
Adopt multi-channel mechanical compression refrigeration system and frequency conversion technology to achieve rapid temperature change of 5 ° C/min; equipped with PID adaptive algorithm to ensure Temperature Uniformity ≤ 2 ° C, support 120 groups of program editing and remote monitoring functions.
Measurement range 0-99.9%, resolution 0.1%, Response Time 1 second, portable design supports rapid on-site detection, probe Sensor can penetrate deep into the material internal measurement.
Processing capacity range of 100~ 7000ml, maximum processing viscosity of 8000CP, suitable for high viscosity materials efficient dispersion processing, suitable for a variety of Disperser models.
With a linear temperature rise and fall rate of 10 ° C/min and a wide temperature range of -60 to 150 ° C, multi-channel refrigeration system and PID adaptive algorithm are used to achieve rapid temperature convergence, and environmentally friendly refrigerants and low noise design are equipped.
Conductivity Detector principle and temperature and humidity compensation technology, measurement accuracy of +/- 0.5%, Response Time of 1 second, integrated design supports on-site rapid detection, suitable for a variety of grain moisture measurement.
