Using 160 * 280mm size, with wire Rod scraping ink to ensure that the film is flat, Glass table is conducive to operation and observation effect.
Using 180 * 480mm size, with wire Rod or Film Applicator scraping ink, is conducive to the film flat and effective, improve film mass.
Glass material is conducive to film flatness, size 230 * 340mm, with wire Rod or Film Applicator for scraping operation is more effective.
Using 140 wire metal anilox roller to control ink film thickness, flexographic samples can be quickly prepared, easy to use and clean, and high repRoducibility.
Using 100 wire metal anilox roller to control ink film thickness, it can quickly prepare flexographic samples, easy to operate and clean, and good repRoducibility.
Using 400 wire metal anilox roller to control the ink film thickness, flexographic samples can be quickly prepared, easy to use and clean, and the repRoducibility is very similar to that of conventional flexographic printing.
Glass material ensures that the film is flat, used with wire Rod or Film Applicator, the specification size is 110 * 180mm, and the operation is simple and efficient.
The wire-wound structure enables coating with a 171.5-micron thick film, while the stainless steel material ensures corrosion resistance and long-term durability. The 9.52mm diaMeter Rod body, combined with 1.91mm steel wire, ensures operational stability.
Using wire-wound stainless steel wire structure, the film thickness is 100 microns, the total length is 375mm, and the application width is 255mm to ensure that the Spreader is uniform and firm, suitable for precision experimental operation.
A groove control film is formed on the smooth Rod body by extrusion process. The wear-resistant stainless steel material is not easy to break the wire and is easy to clean. The wet film thickness is 105.2 μ m and the application width is 300mm.
Using 180 wire metal engraving roller to control the ink film thickness, four pyramidal mesh structure to ensure uniform Spreader, simple operation and easy cleaning, can quickly prepare samples similar to flexographic printing effect.
Wet film thickness of 25.1 microMeters, made of stainless steel for wear and corrosion resistance. Available in two types: formed type and wound wire type. The formed type has no broken wires, is easy to clean, and less prone to clogging.
Wet film thickness 22.9 microns, diaMeter 9.52 mm, the forming Rod uses an extrusion process to process continuous grooves, with no wire breakage and easy cleaning; the wire-wound Rod is based on the traditional principle, and there are differences in coating amount.
The wire-wound process achieves a wet film thickness of 16 microMeters. The stainless-steel material, combined with a 0.18mm wire diaMeter, ensures uniform coating application and long-term stability, making it suitable for the preparation of precision coatings.
Wire-wound process is prepared with 6.9 μm wet-film, and the diaMeter of the steel wire is only 0.08mm. If the hair is thin, seamless winding reduces the risk of broken wire, and is suitable for a variety of fluid Spreader applications.
