Manual control of holding pressure is easy to operate, 15mm thick Organic Glass sealing bucket enhances compressire strength, Vacuum Level range -90~ 0kPa, resolution accurate to 0.1kPa, built-in time display automatic timing clear.
Glass sealing barrel wall thickness of 15mm, automatic constant pressure gas without manual operation, vacuum accuracy level 1, support 0~ -100kPa range, suitable for a variety of Encasement sealing test.
High borosilicate Glass material, corrosion resistance and can withstand large thermal Impact, vacuum negative pressure of 0.095MPa, Speed range 50~ 500rpm, suitable for material synthesis and distillation recovery.
Microcrystalline Glass panel resistant to strong acid and alkali, low expansion coefficient to ensure high temperature without deformation, the highest Operating temperature 450 ℃, 316L stainless steel material comprehensive anti-corrosion, ceramic fiber insulation material lightweight and efficient.
Manual pressure control pressure holding operation is simple, electronic pressure holding device reduces mechanical abrasion, pressure range 0~ -90kPa, accuracy +/- 0.1kPa, Organic Glass sealing barrel wall thickness 15mm to enhance compressive strength.
With imported corrosion-resistant rubber diaphragm, the ultimate pressure reaches 0.085MPa, the pumping speed is 30L/min, and the noise is lower than 50dB. It can operate continuously and stably for 24 hours without lubricating oil.
Microcrystalline Glass panel is resistant to strong acid and alkali, low expansion coefficient to ensure no deformation at high temperature; Operating temperature 450 ℃, ceramic fiber insulation material is lightweight and efficient, and 316L stainless steel around is corrosion resistant.
440 * 355 * 8mm flat Glass substrate is used to ensure film uniformity; chemical corrosion resistant material is easy to clean and maintain, and clip fixed design ensures Spreader Stability.
Glass thickness and air interlayer thickness can be measured at the same time. Glass thickness range is 70mm, air interlayer range is 34mm, light and portable operation is simple.
Equipped with microwave and ultrasonic synergy function, 2000ml large-capacity reactor and 1800W ultrasonic power, support platinum resistance accurate temperature measurement and magnetic stirring, and realize multi-mode chemical reaction control.
Irreversible discoloration records the highest temperature, accuracy +/- 1 ° C to +/- 4 ° C, four-speed temperature monitoring range 104-121 ° C, oil-resistant, water-resistant and steam-resistant, instant Response without power supply.
High borosilicate Glass material, corrosion resistance and high and low temperature resistance, strong ability to withstand thermal Impact; vacuum negative pressure can reach 0.095MPa, support material reaction under negative pressure; Overhead Stirrer Rotation speed 50-500rpm, torque 70N.cm, suitable for a variety of viscosity materials.
Constant pressure ensures uniform sampling, suitable for a variety of powder material testing, implementation of GB9087-88 and other standards, improve sampling accuracy and conformity.
Fully automatic test with microcomputer control, pressure range 0~ -90kPa accuracy +/- 0.1kPa, equipped with 15mm thick Organic Glass sealing barrel and precision pneumatic components, support automatic constant pressure air replenishment and multi-point pressure calibrating.
Adopt Hardness 52 +/- 2HRC wear-resistant and corrosion-resistant alloy steel, double-channel design, range 0~ 100μm, Graduation 5μm, suitable for measurement of particle dispersion of various materials.
