Color Analysis Instrument for Adhesives

The color measurement analyzer for adhesives illuminates the sample through an optical system, and the sensor receives the reflected light signal and converts it into digital chromaticity values. It is used to detect the color consistency of adhesives, monitoring color differences between batches during production and quality inspection processes.
Selection
When selecting, consider matching the measurement aperture to the sample size, with instrument repeatability required to be less than 0.1 ΔE. Check compliance with ASTM D2244 standards. Portable models are suitable for on-site inspections, while benchtop models offer better stability. A color management software suite is necessary for trend analysis.

Terms

Standards

Instruments

Dual Light spectrum analysis technology, Wavelength range 360~ 780nm, Support SCI + SCE simultaneous fast measurement, Automatic calibration and Temperature Humidity Compensation to ensure High Accuracy and Stability.

$ 11337.00

With Φ 4mm and Φ 8mm dual measurement caliber, Repeatability Delta E * ab < 0.06, can store 100 sets of master standards, Measurement time only 0.5 seconds, support sub-color difference display and Color bias analysis function.

$ 1009.00

Light spectrum analysis technology using dual optical path, equipped with pulse xenon arc and LED dual Illuminant, support SCI + SCE simultaneous measurement, Measurement time is less than 4 seconds, with temperature and Humidity calculation compensation function.

$ 8109.00

Using d/8 lighting reception mode, wavelength range 400~ 700nm, Repeatability δ u (Y) ≤ 0.5, can display Light spectrum Linear dispersion and support a variety of color systems, easy to color analysis.

$ 4161.00

Imported matte aluminum reflector to achieve uniform lighting, equipped with six kinds of Illuminants including D65 and UV, table size 700 * 530mm to meet a variety of color requirements.

$ 687.00

Using 45 °/0 ° illumination, Repeatability Standard Deviation ≤ E * ab ≤ 0.08, can store 1500 sets of data, support a variety of Color difference formulas and four Available Light Sources to meet different measurement needs.

$ 501.00

Adopt Φ 4mm measurement aperture and full Light spectrum LED Illuminant, chromatic value Repeatability Delta E * ab 0.05, support cloud color database and a variety of Color difference formula calculation, portable design with dust cover and long battery life.

$ 538.00

Adopt 45/0 illumination light receiving system, 8mm measurement aperture, support single and average Measurement mode, Repeatability Standard Deviation ≤ E * within 0.1, can carry out color difference contrast analysis and color quality control.

$ 307.00

Measurement range 0.5-3000 μm, maximum resolution 0.1μm, support more than 30 image analysis functions, Particle size distribution and morphology analysis.

$ 5237.00

Equipped with five Illuminant system, supports D65, TL84 and other Standard light sources, the interior is coated with Moncel gray N5.5, the width is 60cm, and the multi-point Illuminant observation system enhances the accuracy of color evaluation.

$ 4022.00

With five Illuminant system, Color temperature coverage 2700K to 6500K, no need to warm up without flashing, automatic switching Illuminant and display the use time, low energy consumption without heating, support Metamerism function.

$ 403.00

With eight Illuminant automatic switching and Metamerism functions, no preheating and no flickering, low energy consumption and no heat generation, high luminous efficiency, Illuminant includes D65, TL84, etc., and the color temperature covers 2700K to 6500K.

$ 525.00

With six Illuminant automatic switching function, no need to warm up without flashing, low energy consumption without heating, display the use time of each Illuminant, support Metamerism detection, Color temperature coverage 2700K to 6500K

$ 369.00

Using D/0 geometrical optics structure and full light spectrum LED Illuminant, covering 360-780nm wavelength, Repeatability chromatic value within 0.015, support multi-element Illuminant simulation and rich chroma indicators to ensure measurement Stability and accuracy.

$ 3785.00

Provide uniform ink speed three adjustable 450 to 800rpm, color development speed three adjustable 12 to 25rpm, color development pressure range -20 to 80, support ordinary or UV ink roller, improve work efficiency and applicability.

$ 7658.00

Articles

Spectrophotometer measures ink spectral reflectance and opacity.
This article introduces how to measure the hiding power of ink using a spectrophotometer. The instrument irradiates the ink sample, measures its reflectance within the visible light spectrum, and calculates the hiding power using the Kubelka-Munk model.
The combination of hiding power chart paper and a spectrophotometer enables the digital evaluation of hiding power.
This article introduces how to combine hiding power cards with spectrophotometers to achieve digital assessment of hiding power.
The coating machine applies the adhesive layer of the plaster patch onto the backing layer.
The coating machine applies adhesive evenly onto the backing material through steps such as feeding, coating, drying, and winding, forming a stable adhesive layer.
Colorimeter evaluation of color difference in anodized coloring layers
This article explains how colorimeters are used to evaluate color differences in anodized coloring layers. It describes how colorimeters convert colors into numerical values based on international standards and quantify color variations by calculating the color difference ΔE.
Cylindrical Mandrel Bending Tester for Detecting Flexibility of Coatings
This article introduces how the cylindrical shaft bending tester detects the flexibility of paints. Flexibility refers to the ability of the paint film to resist cracking when the substrate is bent.
A spectrophotometer uses digital language to describe colors, making color differences impossible to hide.
A spectrophotometer measures the color of an object through spectral analysis, converting reflected light data into spectral curves. It then calculates chromaticity parameters such as L*a*b* based on international standards, achieving a digital representation of color.
How to Interpret Color Difference Lab Values Measured by a Spectrophotometer? Save This Color Difference Judgment Standard Now!
This article explains how spectrophotometers measure and evaluate color differences using the Lab color space. In the Lab values, L represents lightness, while a and b indicate the red-green and yellow-blue color biases. The color difference ΔE is calculated using a formula to quantify the variation between a sample and the standard.