CATEGORIES

    Vertical solution mixer

    Overview Products Knowledge Standards Terms
    The vertical solution mixer uses a motor to drive the vertical shaft, which rotates the blades to create forced convection in the liquid, achieving the purpose of mixing and dissolving. It is suitable for uniformly stirring samples such as laboratory coatings and inks to prevent sedimentation and stratification.
    Selection
    Select a motor with corresponding power based on the viscosity of the solution; match the length of the stirring rod to the container size; corrosive liquids require stainless steel material; speed adjustment function adapts to different mixing stages; observation window design facilitates process monitoring.
    Material
    Mixing Effect
    Lifting method
    Capacity
    Viscosity
    Speed range
    Temperature
    Timing function
    Explosion-proof
    Automation

    Terms

    Magnetic Stirring Constant Temperature Bath
    Conductivity Meter
    pH water quality tester
    Potentiometric Titrator
    Salinity Meter
    Variable Frequency High-Speed Mixer
    Explosion-proof mixer
    Multi-parameter Ion Meter
    Laboratory Variable Speed Stirrer
    Heating Stirring Disperser

    Standards

    Active GB/T 46230-2025
    Solution-polymerized SBR—Evaluation methods of viscoelastic properties
    Active GB/T 1632.1-2024
    Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 1: General principles
    Incoming GB/T 3671.1-2025
    Determination of application solubility and solution stability of water-soluble dyes
    Active GB/T 3671.1-1996
    Determination of application solubility and solution stability of water-soluble dyes
    Active GB/T 26812-2011
    Preparation method of reference solutions for the measurement of ion selective electrodes
    Active GB/T 27503-2011
    Test solutions of electrolytic conductivity analyzer - Preparation method of sodium chloride solutions
    Active GB/T 27502-2011
    Preparation method of reference solutions for the measurement of conductivity
    Active GB/T 27501-2011
    Preparation method of buffer solutions for the measurement of pH value
    Active GB/T 39630-2020
    Colloidal solution of silver nanoparticles
    Active GB/T 1632.5-2008
    Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 5 : Thermoplastic polyester(TP) homopolymers and copolymers
    Active GB/T 3401-2007
    Determination of the viscosity of Poly(vinyl chloride) resins in dilute solution using capillary viscometers
    Active GB/T 1632.3-2010
    Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometer - part3: Polyethylenes and polypropylenes
    Active GB/T 1632.4-2020
    Plastics—Determination of the viscosity of polymers in dilute solution using capillary viscometers—Part 4:Polycarbonate(PC) moulding and extrusion materials
    Incoming GB/T 1632.2-2025
    Plastics—Determination of the viscosity of polymers in dilute solution using capillary viscometers—Part 2: Poly(vinyl chloride) resins
    Active GB/T 2423.18-2021
    Environmental testing—Part 2: Test methods—Test Kb:Salt mist, cyclic（sodium chloride solution）

    Instruments

    BANTE ION-Cd standard solution, cadmium ion standard solution 1000ppm general ion calibrating solution
    BANTE ION-Cd standard solution, cadmium ion standard solution 1000ppm general ion calibrating solution

    General ion standard solution with a concentration of 1000ppm, using PTFE solution bottle Encasement, capacity 480mL, suitable for daily ion calibrating needs.

    $ 135.00
    BANTE ION-I standard solution, ionic standard solution, iodine ion 1000ppm
    BANTE ION-I standard solution, ionic standard solution, iodine ion 1000ppm

    General ion standard solution with concentration 1000ppm, PTFE solution bottle Encasement, capacity 480mL, suitable for daily calibrating needs.

    $ 135.00
    BANTE ION-K standard solution, ionic standard solution, potassium ion 1000ppm
    BANTE ION-K standard solution, ionic standard solution, potassium ion 1000ppm

    General ion standard solution with a concentration of 1000ppm, using PTFE solution bottle Encasement, capacity 480mL, suitable for daily ion calibrating needs.

    $ 135.00
    BANTE ION-WH standard solution, ion standard solution, water quality Hardness 1000ppm
    BANTE ION-WH standard solution, ion standard solution, water quality Hardness 1000ppm

    General ion standard solution concentration 1000ppm, suitable for daily ion calibrating, PTFE solution bottle Encasement, capacity 480mL, water Hardness type.

    $ 135.00
    BANTE ION-Na standard solution, sodium ion standard solution concentration 1000ppm
    BANTE ION-Na standard solution, sodium ion standard solution concentration 1000ppm

    The general ion standard solution concentration is 1000ppm, using PTFE solution bottle Encasement, size 190 × 65mm, 500g per bottle, suitable for daily ion calibrating.

    $ 135.00
    BANTE ION-NH4 standard solution, ionic standard solution, general 1000ppm concentration
    BANTE ION-NH4 standard solution, ionic standard solution, general 1000ppm concentration

    The general ion standard solution concentration is 1000ppm, using PTFE solution bottle Encasement, size 190 × 65mm, 500g per bottle, suitable for daily calibrating needs.

    $ 135.00
    HUXI X100-03 tray can be vertically mounted on both sides with 32 5ml centrifuge tubes
    HUXI X100-03 tray can be vertically mounted on both sides with 32 5ml centrifuge tubes

    32 5ml centrifuge tubes can be installed vertically on both sides, using a vertical installation design, suitable for HT-X100 swirl/spin Mixer, improving Sample Handling efficiency.

    $ 149.00
    BANTE ION-Cu standard solution, ion standard solution, copper ion 1000ppm
    BANTE ION-Cu standard solution, ion standard solution, copper ion 1000ppm

    Concentration 1000ppm of copper ion standard solution, PTFE bottle Encasement, capacity 480mL, suitable for daily ion calibrating applications.

    $ 135.00
    BANTE ION-F standard solution, ionic standard solution, fluorine ion 1000ppm
    BANTE ION-F standard solution, ionic standard solution, fluorine ion 1000ppm

    Concentration 1000ppm, Encasement with PTFE solution bottle, capacity 480mL, suitable for daily ion calibrating, to ensure measurement accuracy and Stability.

    $ 135.00
    BANTE ION-Ag standard solution, ion standard solution, silver ion 1000ppm
    BANTE ION-Ag standard solution, ion standard solution, silver ion 1000ppm

    The pRoduct concentration 1000ppm, using PTFE solution bottle Encasement, capacity 480mL, suitable for daily ion calibrating, to ensure measurement accuracy.

    $ 135.00
    BANTE ION-Ca standard solution, ionic standard solution, calcium ion 1000ppm
    BANTE ION-Ca standard solution, ionic standard solution, calcium ion 1000ppm

    Calcium Ion concentration 1000ppm, PTFE solution bottle Encasement, capacity 480mL, suitable for daily ion calibrating, to ensure measurement accuracy.

    $ 135.00
    JNYE JY-30A automatic swirling/spinning Mixer, vertical mixing equipment, intelligent frequency conversion speed regulation
    JNYE JY-30A automatic swirling/spinning Mixer, vertical mixing equipment, intelligent frequency conversion speed regulation

    The equipment supports 0.5-20 liters of barrel paint mixing, revolution speed 100-200rpm, rotation speed 200-400rpm, using multi-stage intelligent frequency conversion speed regulation and door opening and shutdown protection to achieve smooth operation and safe operation.

    $ 2575.00
    FANGRUI 380cp viscosity standard solution, silicone oil type viscosity standard solution Viscometer calibrated
    FANGRUI 380cp viscosity standard solution, silicone oil type viscosity standard solution Viscometer calibrated

    Silicone oil standard solution, calibrated viscosity 380cp, capacity 400ml, suitable for Viscometer calibrating.

    $ 185.00
    BANTE ION-Pb standard solution, ion standard solution, lead ion 1000ppm
    BANTE ION-Pb standard solution, ion standard solution, lead ion 1000ppm

    Universal ion calibrating solution, concentration 1000ppm, PTFE material bottle Encasement, capacity 480mL, to meet the daily calibrating needs of the laboratory.

    $ 135.00
    HANNA HI7091L Oxidation-reduction potential calibrating solution ORP reduction pretreatment solution 500mL
    HANNA HI7091L Oxidation-reduction potential calibrating solution ORP reduction pretreatment solution 500mL

    500mL volume reduction pretreatment solution, using Reagent grade chemicals and tamper-proof sealing design to ensure solution freshness, support ElectRode Fast Response, suitable for ORP measurement reduction reaction conditioning.

    $ 141.00

    Articles

    Lab Mixer Selection - Viscosity Determines Torque
    This article mainly discusses how to select a laboratory mixer based on the viscosity of the material. The higher the viscosity, the greater the torque required. Low-viscosity liquids are suitable for high speed and low torque, while high-viscosity materials require low speed and high torque.
    UV spectrophotometer for measuring residual monomers in polymer solutions.
    This article introduces a method for determining residual monomers in polymer solutions using ultraviolet spectrophotometry. The principle relies on the characteristic absorption of monomers in the ultraviolet region, calculating their content based on the relationship between absorbance and concentration.
    Blade-coating preparation of hole transport layers for perovskite solar cells.
    This article introduces the method of preparing the hole transport layer for perovskite solar cells using the doctor-blade coating technique. The doctor-blade coating method involves spreading the solution evenly on the substrate with a blade to form a thin film, making it suitable for large-scale production.
    The coating machine applies the OLED light-emitting layer onto ITO glass.
    This article introduces the technique of using a coating machine to apply OLED luminescent layers onto ITO glass. The coating principle involves matching solution rheology with substrate surface energy, allowing control over film thickness by adjusting parameters such as viscosity and speed.
    Preparation of metal thin films by the coating method for mechanical property studies.
    This paper discusses the key process parameters in the preparation of metal thin films using a film coater and their effects on mechanical properties. The film coater forms metal thin films on a substrate through solution deposition, with its uniformity and repeatability directly influencing film quality.
    Determination of Transmittance of Resin Solutions Using UV-Visible Spectrophotometer
    This article introduces the method of measuring the transmittance of resin solutions using a UV-Vis spectrophotometer.
    Determination of free amino acid content in protein solutions using a microtitration apparatus.
    This article introduces a method for determining the free amino acid content in protein solutions using a microtiter plate reader. It is based on the ninhydrin color reaction, where amino acids react with the reagent under specific conditions to produce colored compounds, and the concentration is calculated by measuring the absorbance.
    Conductivity meter detects ion impurity content in coatings.
    This article introduces the method of using a conductivity meter to detect the content of ionic impurities in coatings. The principle involves measuring the conductivity of the coating solution to indirectly assess the total amount of ionic impurities, as conductivity is related to ion concentration. The detection steps include sample preparation, instrument calibration, measurement, and data analysis.
    Salt spray test chamber detects the corrosion resistance of coatings.
    The salt spray test chamber accelerates the testing of coating corrosion resistance by simulating a salty and humid environment. It uses atomized sodium chloride solution to form salt spray, which settles inside the constant temperature chamber, and conducts tests under neutral or acidic conditions in accordance with standards.
    UV-Vis Spectrophotometer Measures Ink Pigment Concentration
    This article introduces the method of measuring the concentration of ink pigments using a UV-Vis spectrophotometer. The principle is based on the Lambert-Beer law, which calculates the concentration by measuring the absorbance of the pigment solution at specific wavelengths.
    Applicable Scenarios for Neutral Salt Spray and Copper-Accelerated Acetic Acid Salt Spray Tests
    Neutral salt spray testing and copper-accelerated acetic acid salt spray testing are both accelerated methods used to evaluate the corrosion resistance of materials, simulating saline environments to predict long-term performance. The neutral salt spray test uses a neutral sodium chloride solution, which causes relatively mild corrosion and is suitable for general metals and coatings, such as automotive parts.
    When to use three-point calibration versus two-point calibration for pH meters?
    The calibration of a pH meter is performed to determine the actual zero potential and slope of the electrode, enabling accurate measurement of the acidity or alkalinity of a solution. Two-point calibration is commonly used for daily measurements within a narrow range, while three-point calibration is employed for higher accuracy requirements.
    The laboratory coating machine provides uniform coating for OCA optical adhesive and AR coating.
    The laboratory film coater is a precision instrument used to prepare uniform thin films on substrates, playing a crucial role in the research and development of OCA optical adhesives and AR coatings. It ensures consistent film thickness and prevents defects by precisely controlling parameters such as coating speed, gap distance, and solution viscosity.
    Application of Coating Machines in the Fabrication of Functional Layers for Perovskite Solar Cells
    This article introduces the application of coating machines in the preparation of functional layers for perovskite solar cells. The performance of perovskite cells depends on the uniformity and quality of thin films, such as the electron transport layer and the light-absorbing layer, which are primarily prepared through solution-based coating methods.