Glass thickness and air interlayer thickness can be measured at the same time. Glass thickness range is 70mm, air interlayer range is 34mm, light and portable operation is simple.
Using high-speed ADC data collection, resolution up to 1μm, can simultaneously measure the thickness of multi-layer coatings or coatings plus substrates, with gain automatic switching and estimated thickness setting function, Measurement range 13~ 1000μm (epoxy resin coating).
Measurement range 1.2~ 225mm, support Speed of sound measurement and 12 data storage functions, with upper and lower limit alarm settings and coupling status prompts, suitable for a variety of material thickness detection.
Suitable for 300 ℃ high temperature material thickness measurement, range 2.0~ 100mm, diaMeter 14mm, minimum diaMeter 30mm, 5MHz Frequency to achieve accurate measurement.
In line with ISO2808-1974 standard, the range is 0~ 150μm, the accuracy is not more than 5μm, can measure the wet film thickness and estimate dry-film thickness, suitable for laboratory and pRoduction control.
Measurement range of 5-500μm with a three-blade design, LED Illumination Microscope and swirl/spin system for accurate assessment of Coating thickness and substrate defects.
Measurement range 0-20mm, accuracy 0.001mm, contact pressure 20 +/- 5kPa, suitable for paper, Cardboard and sheet material Film thickness detection, in line with a number of international standards.
The instrument is dedicated to measuring the thickness of sheet materials. The measurement head contacts the workpiece to compress about 0.15mm and then has a zero reading. It can switch different display formats to meet the standard testing requirements.
Dedicated to Coating thickness Gauge calibrating, ensure accurate thickness measurement, suitable for F type equipment, improve Reliability.
Measurement accuracy of 0.01mm, measurement pressure of 20 +/- 0.5kpa, can maintain good parallelism, suitable for film thickness test below 20mm.
Measurement range 0~ 20mm, accuracy of 0.001mm, contact pressure 20 +/- 5kpa, suitable for sheet material thickness detection with certain tightness.
Using smooth steel bar design, no winding steel wire or pressurized groove, film thickness is 0μm, diaMeter 6.35mm, total length 400mm, suitable for machine control film thickness.
Designed for specific types of thickness Gauges, it provides accurate Adjustment and adopts standard diaphragm structure to ensure accurate transmission of thickness measuring instruments and improve the repeatability of test results.
Measurement range 0~ 1250μm, suitable for LEEB220 and LEEB222 Coating thickness Gauge, Abrasion Resistance is good, suitable for a variety of nonmagnetic Coating thickness detection.
Measurement range 0-3000μm, error +/- 3%, easy to carry and high Stability, suitable for a variety of Coating thickness detection.
