Impact specimens with semi-spherical punches are used for energy consumption measurement to evaluate anti-Impact performance. Impact energy range is 3J, Impact speed is 2.5m/s, and it is suitable for a variety of film and paper tests.
Equipped with 200 +/- 0.2g Koenig pendulum and 500g platinum saz pendulum two configurations, the swing period is 1.4 +/- 0.02s and 1 +/- 0.001S, through the photoelectric system automatic measurement of film damping time, to meet the different standards of test requirements.
Using electromagnet cissing pendulum, equipped with two laser Probe recording data, can test 0.1mm to 5.5mm thickness test plate, swing period 1.4s, Organic Glass door cover to reduce the impact of airflow.
Adopt stainless steel pendulum tube to achieve +/- 180 degree swing, equipped with 25 0.4mm nozzles, flow adjustment range 100-1000L/h, support sample holder 1-4 rpm adjustable speed, test water can be recycled.
Adopting Koenig pendulum structure, the total mass is 200 +/- 0.2g, and the swing period is 1.4 +/- 0.02s. The coating Hardness is accurately measured by the swing attenuation time, and the number of swing angles is automatically recorded.
Using the electromagnet cissing pendulum, it can measure the thickness of the test plate from 0.1mm to 5.5mm, and is equipped with two laser Probes to record data. The swing period is 0.625s.
The impact speed is 3.5m/s, the impact energy can be selected from 1J, 2.75J, 5.5J, and the pendulum lift angle is 150 °. It supports a variety of non-metallic material impact tests and is easy to operate.
Support Koenig and Persaz double pendulum automatic switching, steel ball diaMeter 5mm and 8mm, with electromagnetic release and electronic counting mechanism to ensure that the test is accurate and not affected by the environment.
Using electromagnet cissing pendulum, equipped with two laser Probe to record data, the thickness range can be measured 0.1-5 mm, the organic Glass door cover reduces the influence of airflow, and the swing period is 1 second.
Impact energy 2.7mJ, Impact mass 3.0g, tungsten carbide ball head Hardness up to 1600HV, suitable for asperity 0.4um surface, providing accurate Hardness measurement.
High Accuracy swirl/spin encoder is used to collect the pendulum angle and speed, the angle resolution reaches 0.075 °, the wind resistance error is automatically corrected, the Impact speed is 2.9m/s, the pendulum energy can be selected from 2J to 5J, and the intelligent control automatically calculates the results and saves the test data for many times.
Impact method is adopted, the maximum thickness of test plate is 125mm, built-in bubble level and height limit ring, drop weight mass 1000g, punch diaMeter 20mm, die base aperture 27mm.
The photoelectric counter is used to realize automatic counting, and the measurement is fast and accurate; the period of M-3 swing Rod is 0.625s, and the swing time on standard Glass is 440 +/- 6s; the horizontal mechanism is improved, and the scale can be moved horizontally to facilitate zero adjustment.
The C-type Impact device has a small impact force and is suitable for surface hardening and thin-walled component testing; dual coil technology ensures +/- 6HL typical accuracy; built-in directional Sensor automatically compensates for errors; supports 5 Hardness standard conversions.
Using stopwatch counting method, the length of the swing Rod is 500 +/- 1mm, and the total mass of the swing is 120 +/- 1g. The resistance to deformation is evaluated by measuring the ratio of the swing amplitude time on the film to the swing time on the Glass.
