Used for paint film hiding power measurement and reflectance measurement, indication interval 0-100, Repeatability 0.3%, in line with national standards GB/T13452.3, GB9270, GB5211.
Adopt 0 ° illumination diffuse reflection reception principle, Repeatability ≤ 0.3, Indication Error +/- 1.0, suitable for white and shallow Paints hiding power measurement, easy and portable operation.
Using 25 × 25mm ² 32 grid design, Glass plate thickness 1.2~ 2mm, through the standard Checkerboard test can accurately calculate the Coating hiding power, easy and fast operation.
Measurement range 0~ 100, repeability accuracy 0.3%, Permissible Ambient Temperature 20 ° +/- 5 ° C, suitable for film hiding power testing.
Using film lamination technology, with excellent chemical resistance and uniform Spreader effect, paper Film thickness 0.29mm and surface Laminating, with a dedicated annotation area for easy recording of test data.
Using film lamination technology, with excellent solvent and chemical resistance, paper Film thickness 0.29mm, surface Laminating to ensure Spreader uniformity, with annotation section for easy recording of test data.
With 45/0 reflectance and hiding power test function, repeability 0.2%, repRoducibility 0.5%, automatic calibration and correction of black and white board values, support USB data transmission and statistical mode.
White part reflectance 80 +/- 2, non-Laminating design to enhance paint wettability, test area of 0.1 square Meters, Curl and checking resistance, suitable for brushing applications.
Black part reflectance less than 1, white part reflectance 80 +/- 2, no Laminating design to enhance paint wettability, avoid checking or cissing, suitable for specific spreading rate brushing tests.
Adopt 0 ° illumination diffuse reflection reception principle, indication interval 0-100, Repeatability 0.3%, support contrast ratio automatic calculation, equipped with standard plate and working ceramic plate to ensure Measurement accuracy.
Wet film thickness 34.3 microns, using wire-wound design, wear and corrosion resistant stainless steel material, suitable for preparing specific thickness film, easy to detect hiding power and film Gloss.
Adopt the principle of 0 ° irradiation diffuse reflection reception, Repeatability ≤ 0.3, Indication Error +/- 1.0, equipped with standard plate and working ceramic plate to meet the needs of accurate measurement.
Repeatability of 0.3%, accurate measurement of RB and RW values, automatic calculation of contrast ratio, simple operation and strong environmental adaptability.
Hard stainless steel material acid and alkali erosion, can be prepared 100/150/200/250μm four thickness wet-film, the operation of the conversion angle can switch the thickness, application width 80mm.
Using non-fluorescent paper substrate, white reflectance 80 +/- 2, black reflectance < 1, Laminating design enhances Curl resistance, 0.1 square Meter standard area is suitable for spreading rate testing.
